Aprimatic CONTROL NK, Инструкция по монтажу, использованию и обслуживанию электрического оборудования

Страница: 15 / 64

-
15
-
CONTROL NK
CONTROL UNIT
English
DESCRIPTION 1.
Envisaged use and fi eld of application 1.1
NK CONTROL SYSTEM is used for electronic control of NK
series sliding door automations.
The fi eld of application is limited to automatic doors with
one or two horizontal sliding wings used in civil, public or
industrial applications, in dry areas, in covered entrance
areas and foot traffi c passageways.
Warning
!
Do not use the product for purposes other than those
envisaged by the manufacturer or for any improper use.
Do not tamper with or modify the product.
The product must only be installed using APRIMATIC
material.
Warning
!
Keep children away from the operating range of the device
at all times.
Keep control devices in a safe place to prevent use by
children or unauthorised people.
Technical features and data 1.2
See Tab.1 .
Before installing the product, check that the temperature
range marked on the drive is suitable for the location.
BASE SYSTEM COMPONENTS
See fi g.1 .
1
CONTROL NK control unit
2
POWER SUPPLY unit
3
EMERGENCY BATTERY unit
4
24 VAC GEARMOTOR
ACCESSORY DEVICES
See fig.2 for the ACCESSORY devices which can be
installed.
WARNING! Correct functioning of the automation requires
the installation of the control device: Key selector.
IMPORTANT! Also consult the specific instructions
supplied with each accessory.
POWER SUPPLY VOLTAGE
: 230 V ~ (+/- 10 % )
[115V
ON DEMAND
]
EXTERNAL DEVICE VOLTAGE
: 24 V
CARD PROTECTIONS
20 A rapid fuse for card power
supply - short-circuit electronic
threshold at 45 A
POWER SUPPLY UNIT
PROTECTIONS
two 3.15/[6.3] A delayed fuses on
mains
A C C E S S O RY P O W E R
SUPPLY PROTECTION
PTC 1 A resettable fuse
TEMPERATURE RANGE
: - 20 ÷ + 70 °C
EMERGENCY BATTERIES
: two 12 V - 2 Ah batteries
- maintenance-free -
BATTERY
-
CHARGER
built into CONTROL NK card
AUTOMATIC DIAGNOSTICS
: buzzer signals
SERIAL COMMUNICATION PORT
: RS 485
O P E N I N G S P E E D
ADJUSTMENT
11 - 75 cm/s
(1 wing)
22 - 150 cm/s
(2 wings)
C L O S I N G S P E E D
ADJUSTMENT
DIP SWITCH al 50%
11 - 50 cm/s
(1 wing)
22 - 100 cm/s
(2 wings)
DIP SWITCH al 100%
11 - 75 cm/s
(1 wing)
22 - 150 cm/s
(2 wings)
APPROACH SPEED
:
SELF
-
LEARNED
(approx. 6 cm/s)
INVERSION SENSITIVITY
: adjustable
DOOR OPENING TIME
0 - 45 sec. (continuously adjustable)
PARAMETERS ADJUSTABLE BY TRIMMER
:
9
electric lock activation delay,
9
opening and closing appro-
aching speed,
9
thrust force (torque adjustment using current
control),
9
opened door pause time,
9
opening speed,
9
partial
wing opening percentage
PARAMETERS ADJUSTABLE BY DIP SWITCH
:
9
fixed or adaptive partial opening,
9
break-in response
enabling ,
9
master/slave mode enabling,
9
closing speed
(as percentage of opening speed) ,
9
photocell contact type,
9
emergency operation (opening or closing) ,
9
electric lock
enabling for “exit only” operation mode,
9
settings during power
failure: continuation or application of the last operation (using
emergency batteries)
,
9
settings if emergency batteries reach
critical threshold during power failure: >ast operation (opening
or closing), >electric lock maintained, >electric lock OFF.
Base components fi g. 1 -
Technical features and data tab. 1 -
3
2
1
4