manualshive.com logo in svg

Applied Biosystems QuantStudio 6 Flex, Руководство пользователя

"Applied Biosystems QuantStudio 6 Flex - мощный инструмент для исследования генетических данных. Вы можете бесплатно загрузить пользовательское руководство на manualshive.com, чтобы узнать больше о функциях и возможностях этого устройства. Не упустите возможность загрузить свой экземпляр руководства прямо сейчас!"

Поделиться
Скачать
background image

We recommend several protective devices to protect the instrument in environments

with large voltage and power fluctuations.

Power line regulator

We recommend the use of a 1.5-kVA power line regulator in areas where the supplied

power fluctuates in excess of ± 10% of the normal voltage. Power fluctuations can

adversely affect the function of the instrument.

Note: 

A power line regulator monitors the input current and adjusts the power

supplied to the instrument or computer. It does not protect against a power surge or

failure.

Uninterruptible power supply (UPS)

We recommend the use of a 1.5-kVA uninterruptible power supply (UPS), especially

in areas prone to power failure. Power failures and other events that abruptly

terminate the function of the QuantStudio

™

 12K Flex System can corrupt data and

possibly damage the computer or the instrument.

IMPORTANT! 

UPSs provide power for a limited time. They are meant to delay the

effects of a power outage, not to serve as replacement power sources. In the event of a

power loss, power off the instrument and the computer, unless you expect to regain

power within the battery life of the UPS.

Surge protector

We recommend the use of a 10-kVA surge protector (line conditioner) in areas with

frequent electrical storms or near devices that are electrically noisy, such as

refrigerators, air conditioners, or centrifuges. Short-duration, high-voltage power

fluctuations can abruptly terminate the function of, and thereby damage the

components of, the computer and the instrument.

Note: 

A dedicated line and ground between the instrument/computer and the

building’s main electrical service can also prevent problems caused by power

fluctuations.

Instrument software

The QuantStudio

™

 6 and 7 Flex Systems include a suite of software applications that

can be used to calibrate, run, automate, and integrate the instrument into a laboratory

workflow. The installation of the software contains the components described in the

following sections; however, additional software may be available for the

QuantStudio

™

 6 and 7 Flex Systems. Go to thermofisher.com/qpcrsoftware for a

complete list of compatible software, and for updates and patches for the system

software and firmware.

The requirements for the computer used to operate the QuantStudio

™

 6 and 7 Flex

Systems can vary depending on the version of the QuantStudio

™

 Real-Time PCR

Software that you are running. To determine the computer requirements for your

system, check the software release notes at thermofisher.com/qpcrsoftware. The

release notes are on the same page as the link for the software download.

Electrical

protective devices

Computer

requirements

Chapter 1 

Getting started

Instrument software

1

22

QuantStudio

™

 6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide

Содержание QuantStudio 6 Flex



































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для QuantStudio 6 Flex

Pall T Series Care And Use preview
T Series
Бренд: Pall Страницы: 51
ZAMST A1 Instructions For Use Manual preview
A1
Бренд: ZAMST Страницы: 21
Obdstar BT06 Instructions For Functions preview
BT06
Бренд: Obdstar Страницы: 10
SALUDA MEDICAL Evoke Clinical Manual preview
Evoke
Бренд: SALUDA MEDICAL Страницы: 61
Zempire EVO Series Pitching Instructions preview
EVO Series
Бренд: Zempire Страницы: 2
Gatekeeper ITSS Installation Manual preview
ITSS
Бренд: Gatekeeper Страницы: 8
Gate Bure Rise & Go DB 56-309 Technical Manual preview
Bure Rise & Go DB 56-309
Бренд: Gate Страницы: 8
Safavieh TBL4102 Quick Start Manual preview
TBL4102
Бренд: Safavieh Страницы: 2
Vendlet STANDARD Quick Manual preview
STANDARD
Бренд: Vendlet Страницы: 2
UniPix ATMOS Operation Manual preview
ATMOS
Бренд: UniPix Страницы: 24
V.ORLANDI RP10 Installation, Operating And Maintenance Instructions preview
RP10
Бренд: V.ORLANDI Страницы: 144
ubicquia ubigrid DTM+ Installation Manual preview
ubigrid DTM+
Бренд: ubicquia Страницы: 36
ebm-papst R1G225-AG15-11 Operating Instructions Manual preview
R1G225-AG15-11
Бренд: ebm-papst Страницы: 10
Eaton CEAG Exit Cube 33822 LED CGLine+ Mounting And Operating Instructions preview
CEAG Exit Cube 33822 LED CGLine+
Бренд: Eaton Страницы: 20
swamp LT-LP-F09 User Manual preview
LT-LP-F09
Бренд: swamp Страницы: 5
Idex Vetter QuickStrut Operating Instructions Manual preview
Vetter QuickStrut
Бренд: Idex Страницы: 14
V&P Scientific SpinVessel 650ml Operating Instructions Manual preview
SpinVessel 650ml
Бренд: V&P Scientific Страницы: 9
PR Lighting LED Studio 3300D Product Manual preview
LED Studio 3300D
Бренд: PR Lighting Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды