Applied Biosystems QuantStudio 6 Flex Скачать руководство пользователя страница 169

Страница: 169 / 194

Safety

■

Symbols on this instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

■

Safety information for instruments not manufactured by Thermo

Fisher Scientific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

■

Instrument safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

■

Laser safety—barcode scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

■

Workstation safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

■

Safety and electromagnetic compatibility (EMC) standards . . . . . . . . . . . . . . . 177

■

Chemical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

■

Biological hazard safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

WARNING!

GENERAL SAFETY. Using this product in a manner not specified

in the user documentation may result in personal injury or damage to the

instrument or device. Ensure that anyone using this product has received

instructions in general safety practices for laboratories and the safety

information provided in this document.

Before using an instrument or device, read and understand the safety

information provided in the user documentation provided by the

manufacturer of the instrument or device.

Before handling chemicals, read and understand all applicable Safety Data

Sheets (SDSs) and use appropriate personal protective equipment (gloves,

gowns, eye protection, and so on). To obtain SDSs, see the “Documentation

and Support” section in this document.

Symbols on this instrument

Symbols may be found on the instrument to warn against potential hazards or convey

important safety information. In this document, the hazard symbol is used along with

one of the following user attention words.

• CAUTION!—Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury. It may also be used to alert against

unsafe practices.

• WARNING!—Indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury.

• DANGER!—Indicates an imminently hazardous situation that, if not avoided,

will result in death or serious injury.

QuantStudio

™

6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide

169

Содержание QuantStudio 6 Flex



































































































































































































Результаты поиска

Содержание QuantStudio 6 Flex

Отзывы:

Бренды по названию

Популярные бренды

Applied Biosystems QuantStudio 6 Flex, Руководство пользователя

Результаты поиска

Содержание QuantStudio 6 Flex

Отзывы:

Бренды по названию

Популярные бренды