Antec Scientific ROXY Exceed, Руководство пользователя, Страница: 36 / 126

36 211_0010 - ROXY Exceed user manual - rev 04
Cleaning
In general, the ROXY Exceed needs very little maintenance. The outside
of the potentiostat may be cleaned with a non-aggressive cleaning liquid.
In case of leakage in the cell cabinet (tubing, connectors, cell, column etc.)
remove the spilled mobile phase or other solutions as soon as possible be-
cause this may damage the paint layer, or result in the deposition of salt
crusts (in case of buffered mobile phases), which could block the drain in
the bottom of the cell cabinet. Remove any dust on the protective screens
that cover the fans in the oven compartment.
Replacement of fuses
Replace blown fuses with fuses of proper type and rating as stipulated on
the rear panel and specified in the installation section of this manual. The
fuse holder is integrated in the mains connector. Ensure that the instru-
ment is never put in operation with fuses of a different type. This could
cause fire.
In case the fuses blow out repetitively contact Antec or its representatives
for instructions and/or service of the instrument.
USE ONLY WITH 250 V FUSES
EMPLOYER UNIQUEMENT
AVEC DES FUSIBLES DE 250V
Do not use any organic solvents to clean the exterior of the
potentiostat, because this may lead to damage of the paint layer.