Antec Scientific ROXY Exceed Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 126

Antec Scientific ROXY Exceed Скачать руководство пользователя страница 30

30

211_0010 - ROXY Exceed user manual - rev 04

Software

The ROXY Exceed can be used remote in combination with PC control
software. There are two software packages available for control of the
ROXY Exceed electrochemical potentiostat:

•

Dialogue Elite software from Antec Scientific, The Netherlands.

•

Chromeleon CDS (version 7.2.9 and higher), ThermoFisher
Scientific, USA*

*) Exceed control driver for Chromeleon planned to be released Q1 2020, besides a
Chromeleon license (Instrument class 3 license) a separate software license is required for
control of the Exceed under Chromeleon.

The Antec Dialogue Elite software is used for instrument control and Quali-
fications and is also required for the upload of new firmware (= embedded
software controlling the ROXY Exceed electronics). In this section the in-
stallation of Dialogue Elite and configuration of the ROXY Exceed is
shortly described. Note: this is by no means a replacement of the installa-
tion documentation available for the software packages. Please refer to the
software documentation for details.

Ensure you have Administrator access rights in your system before

you start with the installation of the software packages. Dialogue Elite
users must have read/write access to all software (sub) folders.

Dialogue Elite

To install the software:

•

Download the latest version of the Dialogue Exceed from the
Antec website

www.antecscientific.com

(register to get access).

•

Double click on the setup.exe file to start the installation wizard

•

Follow the instructions of the installation wizard for successful
installation of the software.

•

Insert the Dialogue Exceed license dongle to get full access to the

software (without dongle it will operate in demo mode).

•

Make sure that the LAN connection is configured and the LAN
cable is connected.

•

Power up the potentiostat by means of the mains switch on the
rear panel.

•

Start the program Dialogue Exceed from the Windows start menu.

•

During start-

up the ‘Select devices’ menu will pop-up as shown

«
...
28
29
30
31
32
...
»

Содержание ROXY Exceed































































































































Отзывы:

Нет отзывов