Antec Scientific ROXY Exceed, Руководство пользователя, Страница: 109 / 126

CHAPTER 9 Rear panel I/O 109
Table VIII. DIGITAL I/O connector layout.
Pin Type I/O Function
(default)
Configurable
I/O
Description
1,2,3 Relay 1 Relay 1 - Contact between 3 (common)
and 1 (default), activated by
time file Outp 0100 or Com-
mand 47
4,5,6 Relay 2 Relay 2 - Contact between 6 (common)
and 4 (default), activated by
time file Outp 0001 or Com-
mand 47
7 TTL OUT AUX 1 - Free programmable TTL out-
put, activated by time file
Outp 0001, Command 47
8 TTL OUT AUX 2 - Free programmable TTL out-
put, activated by time file
Outp 0010, Command 47
9 TTL OUT AUX 3 - Free programmable TTL out-
put, activated by Command
47
10 TTL OUT AUX 4 - Free programmable TTL out-
put, activated by Command
47
11 TTL OUT Overload A*, 1-2 Active in case of signal over-
load (‘OUT OF RANGE’,
'PAD OVLD')
12 TTL IN Cell on 1 A, 1-2 Trigger to switch the cell on
13 TTL IN Cell on 2 - Trigger to switch the cell on
15 TTL IN Cell off 1 A, 1-2 Trigger to switch the cell off
16 TTL IN Cell off 2 - Trigger to switch the cell off
18 TTL IN Autozero 1 A,1-2 Trigger to zero/null the cell
current (compensation Ic)
19 TTL IN Autozero 2 - Trigger to zero/null the cell
current (compensation Ic)
21 TTL IN Start 1 A,1-2 Trigger to start a Scan and
Data-acquisition
22 TTL IN Start 2 - Trigger to start a Scan and
Data-acquisition
25 GND GND - Ground connection
*) A = All boards.
In the potentiostat accessory kit (pn .0200) a dedicated I/O cable is sup-
plied with an I/O connector board with screw terminal connections for easy
connection of open-ended electrical wiring for I/O:
pn 250.0131B ROXY Exceed I/O conn. Board
pn 250.0131C ROXY Exceed I/O cable 25M-25M, 1.8m