Antec Scientific ROXY Exceed, Руководство пользователя, Страница: 123 / 126

CHAPTER 11 Potentiostat accessories 123
Trigger cable
The ROXY potentiostat is delivered with 250.0032X ROXY potentiostat
trigger cable.
The 25-pins d-sub connector of the trigger cable should be connected to
the digital I/O connector on the rear panel of the ROXY Exceed potenti-
ostat. The output lead with screw terminal block marked ‘MS trigger’ can
be used to automatically start acquisition of an MS via the Dialogue Elite
software , by connecting it to an available start input of an MS. Check the
technical documentation of your specific MS for details how to make the
connections on the MS. The black wire on the cable should be connected
to ground.
The input lead with s
crew terminal block marked ‘START trigger’ can be
used to automatically start an event table of sequence in Dialogue Elite or
a sample sequence in Clarity, by connecting it to an available external start
output (relay/contact closure) of for example an LC system, autosampler
(inject signal) or other external device. Check the technical documentation
of your specific equipment for details how to make the connections on the
external device. The black wire on the cable should be connected to
ground.