Antec Scientific ROXY Exceed, Руководство пользователя, Страница: 22 / 126

22 211_0010 - ROXY Exceed user manual - rev 04
Electrical and power requirements
The customer is responsible for providing appropriate electrical power
and power outlets in the laboratory.
1. The installation of electrical supplies and fixtures in the laboratory
must be in compliance with all local regulations and safety stand-
ards.
2. The power source should exhibit minimal power transients and
fluctuations. The AC mains supply voltage source should not fluc-
tuate more than +/- 10% from the nominal voltage. If your mains
voltage is unstable ( >10% of nominal voltage use an Uninter-
ruptable Power Supply (UPS) The mains supply must include a
correctly installed protective earth conductor.
3. The Roxy potentiostat is equipped with an universal AC/DC
switched-mode power adapter rated for 100
–240 V AC and 50/60
Hz. Every potentiostat is delivered with a set of 2 power cords for
the following regions:
•
EUR (CEE7/7 plug to IEC60320 C13 plug)
•
US (NEMA 5-15 plug to IEC60320 C13 plug)
Tip: Installation of the ROXY potent PC
on a suitable movable laboratory cart/table
has multiple advantages:
- Easy access to all sides of the instrumentation
- System can be easily manoeuvred next to the
(ESI inlet) MS
- Flexibility with respect to use of both ROXY
potentiostat and MS.
To protect against power transients (voltage spikes and power surges)
it is advised to connect the equipment over an electrical surge
protector.