36
If you are working with a matrix in your setup, you must add it into
your show. To do so, follow these few steps:
1/
On the
ORCHESTRA
show page, press
Matrix Setup
to enter
the
Matrices
page.
2/
press
Add
, then press
Edit
if you wish to rename your matrix.
3/
From the
Type
dropdown menu, select the type of matrix you
are using.
4/
Select the connection protocol in the
Connection
panel (we
recommend using TCP).
5/
press
LAN settings
to enter the
LAN settings
page, and
configure the LAN settings accordingly.
* TIP *:
Please be sure your LAN settings correspond to those of
your matrix device.
6/
press the
[OK]
button to return to the
Matrices
page, which
should now display the matrix you just configured.
7/
press the
[OK]
button again to return to the
ORCHESTRA
show page.
Once the matrix has been added, you must add the slave device to
a Screen.
1/
Select the Screen you wish to work in, and press
Screen Setup
.
2/
press
Edit
if you wish to rename the Screen, and choose the
slave device type from the
Type
dropdown menu.
3/
press
Edit Devices
, then press
Add
on the
Device Setup
page.
4/
press Edit if you wish to rename your device, then select the
connection protocol for the device.
5/
press
LAN Settings
to configure the IP address and port of the
device.
6/
press the
[OK]
button twice to return to the Devices page,
which should now display the device you have configured.
7/
press the
[OK]
button to return to the
Screen Setup
page.
WORKING WITH A MATRIX
6-1. MATRIX SETUP
6-2. MATRIX CONFIGURATION
Содержание ORCHESTRA
Страница 1: ...version 3 10 USER MANUAL...
