Analog way ORCHESTRA, Руководство пользователя

Страница: 44 / 48

7/ If you are setting up a multiple units Soft Edge, split all of your sources to input each one in the same input
# on each unit (eg.: split your DVD player to input it on input #5 on all of your units).
8/ In the “Input” menu, set the corresponding “Input Type” for each input.
9/ In the “Soft Edge” menu, select the appropriate Soft Edge “Type”: Horizontal or Vertical.
10/ In the “Soft Edge” – “Test Pattern” menu, select the “SE Centering” pattern.
11/ In the “Soft Edge – “Covering” menu, adjust the covering so that the 2 dashed lines of the test pattern line
up to make one straight line in the middle of the Soft Edge.
If you can not get a perfectly straight line, set the covering as best as possible and then adjust the
projectors with their Lens Shift to get a perfectly straight line.
43
Covering Area
Light Gray Dark Gray Dark Gray
Luma level
Screen
Black
Light Gray
Dark Gray
The solution consists in adjusting the
BLACK LEVELS of the image outside the
covering area.
☺
projectors well aligned.
 Top and bottom not aligned.

Too small covering area.
 Edges not paralleled
You can also use the “Grid” test pattern in the “Output” – “Test Pattern” menu to help you properly align the
projectors together.
WARNING: Do not use the projectors’ Keystone function to correct image parallelism problems. Using the
Keystone will make it impossible to use the Soft Edge Curves.