Analog way ORCHESTRA, Руководство пользователя

Страница: 45 / 48

Covering
Area
Luma
level
Luma
level
Screen
Black
Light Gray
Light Gray
Dark Gray
Dark Gray
Black
Screen
BLACK LEVEL
adjustment
12/ In the “Soft Edge” – “Test Pattern” menu, select “OFF” to remove the test pattern.
13/ In the “Soft Edge” – “Black Levels” – “Level Tint” menu, adjust the “Left” and “Right” menus to get the
luminance in the left and right areas of the projection to match the luminance of the overlapping area.
This adjustment must be done on a black projection (no sources).
This adjustment will be made easier if you are in the darkest environment possible.
14/ If during the black level adjustments, thin white columns appear on the left and right edges of the
overlapping area, you can correct them by adjusting the Left and Right areas in the “Soft Edge” – “Black
Levels” – “Left-Right Area” menu.
15/ In the “Soft Edge” – “Test Pattern” menu, select the “H Grey Scale” pattern if you are in Horizontal Soft
Edge or the “V Grey Scale” pattern if you are in Vertical Soft Edge.
16/ In the “Soft Edge” menu, activate the “Blending” menu.
17/ In the “Soft Edge” – “Curves” menu, adjust the Soft Edge Curve with the “X1, Y1, X2, Y2” adjustments, so
that the luminance of the projection becomes uniform throughout the projection area (entire screen).
18/ When the adjustment becomes acceptable, switch OFF the test pattern and display your background
source to do any fine tuning if required.
44