37
If you are working with an 8x4 matrix (8 in, 4 out) for example, you
will need to define the links between the slave device and the matrix
for the
ORCHESTRA
to route signals properly.
1/
press
Edit Inputs
to open the Inputs page.
2/
Select
Input 1
from the dropdown menu, and press the Matrix
Mapping tab.
3/
In the linked to Matrix dropdown line, select your Matrix.
4/
Select
Output 1
in the
Matrix Output
dropdown menu.
5/
Repeat steps 2 & 3 for
Inputs
#2 to #4 (matrix outputs #2 to
#4).
6/
press the
[OK]
button to return to the
Screen Setup
page.
So far, you have set a series of links between your slave device and
a matrix, but you are still limited to the slave device’s input switching
(source 1 to slave device input #1, source #2 to slave device input
#2 and so on). To change this, proceed as follows:
1/
press
Edit Sources
to open the Source Setup page, and set
the source
Type
to
Live
.
2/
In the preview Source section, press source button 1, and
press
Edit
if you wish to rename it.
3/
In the
Linked to Matrix
dropdown menu, choose the matrix
entered previously, then the type of signal coming from the
matrix.
4/
In the
Matrix
Input
dropdown menu, select the
Matrix Input
number you like.
5/
Repeat steps #2 to #4 for sources #2 to #8.
Содержание ORCHESTRA
Страница 1: ...version 3 10 USER MANUAL...
