DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 19
TRANSLATION OF PERSON OR PURCHASES
The machine is not approved for the transportation of other persons besides the operator who must be in
the driving position of the machine.
Do not leave people outside the machine during work.
Do no allow anyone to get on the work equipment.
Do not carry persons on board the machine.
Do not use the machine for the transport of objects, except for those intended and equipped with special
attachments.
Do not use the machine as a platform or scaffolding and in no case for any function other than that specified
by the manufacturer.
GETTING ON AND OFF FROM THE MACHINE
For climbing on the vehicle, you must use the stairs and the special gates near the driving position; it is
forbidden to use the levers and the control devices.
If the car starts to move without operator inside, do not climb the car with a jump to try to stop it.
It is forbidden to go up or down the machine when it is in motion.
Get out of the machine only when it is completely stopped and stable.
Do not climb or get out of the machine by jumping or holding tools.
Go uphill or get off the driver’s seat or from other raised parts always facing the engine; to ensure the
support always hold both hands and a foot or both feet and a hand positioned on the steps and handrails.
Do not climb on the engine hood or other parts of the machine.
DRIVER’SEAT
Before entering the operator’s cab, always, remove mud and oil from the sole of the shoes. If you operate
the pedal with mud or oil under the sole of the shoe, your foot could slip, causing accidents.
Keep the area around the operator seat clean.
Do no put any object at the foot of the operator seat or around the pedals, and do not hang anything on the
control levers. The latter could be unintentionally driven, causing uncontrolled displacement of the machine
or the operation of the work equipment, and therefore of danger situations.
Arrange items that are not necessary for driving operations in the place they are intended for.
Do no bring objects into the pockets that may fall into the open compartments of the machine.
Always keep the guide spot away from foreign objects, especially if not secured.
Do no leave components or tools scattered in the operator’s cab.
Do not use mobile phones in the operator’s cab while driving or operating the machine.
Never bring hazardous objects into the operato’rs cabine, for example inflammable or explosive objects.
CABIN/OPERATOR PROTECTION
Do not modify, repair, or remove the operator’s protective structure. The protection offered by the cab/roof
would be compromised, creating a risk that could result in death or serious injury to people if structural
damage or modifications (welding, drilling, etc.) could result.
The protective structure, the operator seat, the seat belt and all the uprights must be carefully checked after
accidents.
Replace all parts that show signs of damage. The spare parts used must be original, as indicated in the
Parts Catalog.
ROPS STRUCTURE
The ROPS structure serves to protect theoperator and to reduce the impact energy in case of overturning
the machine.
The ROPS structure is an integral part of the cabin.
The ROPS structure conforms to the regulations for the type of machine. If it is damaged, repaired or
modified without permission, its deformability may change. In that case it is no longer able to perform its
function properly and must be replaced.