DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 78
In the event of a vehicle failure with the need to traverse it,
proceed as flowwos to proceed with mechanical unlocking of the
parking brake. Unscrew the 2 screws (1) completely from the
frame (2), remove the spacer (2) and tighten the screws (1) on
the frame (3).
Attention : screws must be screwed alternately by rotatin them by
30 ° al a time; do not fully screw one of the screws and then the
other one.
It is not necessary to screw the screws completely; you must stop
as soon as the brake is unlocked.
Proceed reverse to reset the negative brake
To place the gear in neutral, proceed as follows :
loosen the two hydraulic hoses (
4
) and (
5
) loosen the shaft (
6
) until it
is no longer resistant and the gear is unlocked.
To reset the gearbox, proceed in reverse to the operations described
above.
4
5
6