DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 58
5.2.4 MECHANICAL GEAR SHIFT KEY
The key selects the two mechanical gears
Turtle: Working speed (1st mechanical gear)
Hare: Transfer speed (2nd mechanical gear)
During the phases of work and off-road movement it is recommended to use 1st mechanical gear.
During the phases of movement on the road it is recommended to use the 2nd gear mechanical gear.
The selection of mechanical gears must be mandatory with a stationary and
stable vehicle
To change the mechanical gear, proceed as follows:
1) completely STOP the machine and OPERATE THE SERVICE BRAKE
2) INSERT the desired mechanical gear
The correct gear change is signalled by a beep
If The sound signal persists, the gear is not engaged. To Insert it correctly do the three actions to follow
SIMULTANEOUSLY
1) Press the Change button to the desired position;
2) Press the Shift Consent key in the figure;
3) Make some small movement with the machine until the gear is properly seated and the buzzer stops.
