DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 98
ENGINE COOLANT CHANGE
(see also Engine Manual)
Open the engine cover only with the engine switched off.
Pressurized System: Hot coolant may cause severe burns. Before opening
the filler cap, stop the engine and wait until components of the cooling
system cool down. Loosen the filler cap slowly to release pressure.
Set the machine on level ground.
Turn off the engine.
Wait until the liquid has reached room temperature.
Slowly unscrew the radiator cap.
Completely drain the liquid through the valve on the engine crankcase into a prepared
container.
Slowly pour the recommended fluid through the filler neck of the radiator until full
coverage.
Put the cap back
Close the hood.
Run the engine for a few minutes.
Allow engine to cool.
Top up the level.
Only use coolant of the type and brand recommended by the manufacturer
as per the supplies table, in the right WATER-ANTIFREEZE percentages.
Avoid environmental pollution. Dispose the used coolant properly.
