DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 73
Always drive to the car to enter or exit the driving position; make sure that
your shoes and hands are clean and dry to avoid slipping and falling.
When possible, stop the machine on a flat, dry ground.
Remove the ignition key before leaving the machine.
Bring all controls to neutral position, if necessary, leave emergency lights on.
Abandon and close the machine.
Use the handles and steps to get out of the machine. If you leave the machine close and lock all the crystals
and lock the door If it is present.
Verify that the fuel cap and engine hood are locked.
6.15
LOAD/DOWNLOAD OF DUMP
The movements of the dump must be performed slowly and progressively.
During the loading phase, place the machine, for stability reasons, on a stable and well-leveled ground. Avoid
loading on soft and low-level terrain.
The weight of the material loaded on the dump must never exceed the maximum load value indicated in the
license plate placed on the vehicle.
Once the dump is loaded, before you start moving, check that the load arrangement has been carried out
correctly and that it cannot cause imbalances to the stability of the machine.
Make sure that the loaded material does not exceed the upper limit of the dump and that it prevents it from
maintaining perfect frontal visibility.
Do not carry objects (punches, axes, bins, etc.).
Avoid abrupt dump-lifting manoeuvres.
If you are assisted by a ground operator during the unloading phase, be careful when performing manoeuvres.
Do not unload the dump with a steering machine; The machine must be positioned in a straight line during the
unloading phase.
