Ammann 5953002, Руководство по эксплуатации

Страница: 16 / 194

10 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
9
10
3
1
2
5
11
3487
4
6
8
7
590074
Machine description
Tandem machine with an articulated frame and two smooth
drums. Both drums are hydrostatic-driven and vibrating. The
rear drum vibration is switchable. The concept of the frame
allows compacting close to the walls and elevated kerbs on
both sides of the machine. It is convenient for works within con-
strained areas due to its small dimensions and short turning ra-
dius. The operator’s post provides perfect control of both edges
of the drums.
Combined machines have only a front smooth vibrating drum.
The rear axle consists of tyres with smooth shoes (compactor).
Specification of the expected use of the machine
The machine is designed for small compaction works in road
construction (building local roads, cycle paths, pavements, par-
king areas and garage driveways) and in building construction
(small industrial areas).
The machine is suitable for compacting asphalt mixes up to the
(compacted) layer thickness of 120 mm (4.7"), hydraulically con-
solidated mixtures up to the layer thickness of 150 mm (5.9"),
mixed soils up to the layer thickness of 200 mm (7.9") or sandy
and gritty materials up to the layer thickness of 300 mm (11.8").
The machine is not suitable for compacting rock fill, loam and
clay materials.
The machine is designed for operation under conditions accor-
ding to EN 60721-2-1:2014: WT, WDr, MWDr (i.e. mild climate
zone, warm dry zone or hot dry zone with a limited ambient
temperature range from -15 °C (5 °F) to 45 °C (113 °F). Storage
temperature from -25 °C (-12 °F) to + 45 °C (113 °F).
The standard version of the machine is not designed for opera-
tion on roads. For more information, please contact your dealer.
The machine that complies with the requirements as to health
protection and safety is provided with a nameplate with CE cer-
tification.
1 - Name – always stated only in the English version
2 - Type
3 - Serial number
4 - Operating weight
5 - Maximum weight
6 - Rated power
7 - Version
8 - Transport weight
9 - Front axle load
10 - Rear axle load
11 - Year of manufacture
Nameplate position
Nameplate
Please fill in the following data:
(see nameplate and Kubota engine nameplate)
Machine type
................................................................................................................
Serial number of the machine
................................................................................................................
Year of manufacture
................................................................................................................
Engine type
................................................................................................................
Serial number of the engine
................................................................................................................
The data mentioned in the table refer always when you contact
the dealer or manufacturer.
1.1 Basic data