Ammann 5953002, Руководство по эксплуатации, Страница: 109 / 194

103 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
3.1 Safety and other measures during maintenance of the machine
3.1.1 Safety during machine maintenance
Carry out lubrication, maintenance and adjustment as
follows:
•
charge only professionally trained personnel,
• according to safety instructions given in the Operating man-
ual,
• in intervals stated in the lubrication chart according to
worked hours,
• on the machine standing on a flat and solid surface and se-
cured against movement (with scotch blocks), always with
the engine off, the key removed from the ignition box and
the wiring disconnected,
• on cold machine parts,
•
after the machine, lubrication points and maintenance
points have been cleaned
• using suitable, undamaged tools,
• by replacing parts with new original parts according to the
spare parts catalogue,
•
by providing sufficient lighting of the entire machine in case
of poor visibility and at night
• by reinstalling all removed covers and safety elements after
the work is completed
• retighten screw connections to the specified tightening
torque and check the connections for leakage,
• after the operating fluids are heated – beware of burns – use
only recommended media.
After the adjustment or maintenance is completed,
check all safety devices for proper operation!
3.1.2 Fire protection when operating fluids are
changed
•
Considering the fire danger, the flammable liquids used on
the machine are divided into the following hazard classes:
II hazard class – diesel fuel
IV hazard class IV – mineral oils, lubricating greases
• The oil change point must be where it cannot interfere in
explosion or fire hazard areas.
• It must be identified by “No smoking” and “No open fire”
plates and signs.
• The handling area must be dimensioned so that it can catch
a volume of the flammable liquid equal to the capacity of
the biggest vessel, transport container.
• It must be equipped with portable fire extinguishers.
•
For handling oils and diesel fuel, use vessels such as metal
barrels, jerrycans and sheet-metal cans.
• The transport containers must be properly closed during
storage.
• The containers must be provided with one hole, always
stored with the hole up and secured so that their content
cannot flow out and drip off.
• Vessels must be marked with non-removable writings show-
ing the contents and flammability classes.