Ammann 5953002, Руководство по эксплуатации

Страница: 62 / 194

56 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
S590001
2.6 Controls and checking instruments
Document box
The storage box situated on the inner left side of the bonnet is
used to store the Operating Manual and other documents rela-
ted to the operation of the machine.
The Operating Manual must always be kept in the machi-
ne in an appropriate place to be always available for the
driver of the machine for viewing.
Movement blocking
If the driver is not sitting on the seat, moving off is blocked. In
this case, moving the travel control out of the parking brake (P)
position immediately switches off the engine.
To enable engine start, sit on the seat and set the travel control
to the parking brake position (P).
Machine stop
If the driver leaves the seat for more than 5 seconds and less
than 10 seconds when the travel control is not in the parking
brake position (P), the machine stops. The traction force of the
machine is off, vibration is off and, after a delay, the parking
brake engages (P).
To be able to move off again, sit on the seat and set the travel
control to the parking brake position (P).
Engine shutdown
If the driver leaves the seat for more than 10 seconds when the
travel control is not in the parking brake position (P), the engine
shuts down.
To re-enable engine start, sit on the seat and set the travel con-
trol to the parking brake position (P).
It is forbidden to load the seat switch with other items!
When operating the machine, the driver must follow the
safety regulations and not carry out any activity that mi-
ght endanger the safety of work; the driver must fully
focus on steering the machine.
When operating the machine, the driver must always sit
on the seat.
When leaving the machine, the driver must take measu-
res against unauthorized use of the machine and against
unintentional starting.