Ammann 5953002, Руководство по эксплуатации

Страница: 61 / 194

55 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
615025
2
4
588070C
1
3
OPERATING MANUAL
Seat
Seat adjustment
1 Backrest inclination adjustment
2 Seat springing stiffness
3 Longitudinal seat travel
4 Cross seat travel
Seat springing stiffness
Turn the switch (2) to set stiffness according to driver’s weight
between 50 and 120 kg (110 - 265 lb).
Adjust the seat before driving the machine.
The driver must be fastened with the safety belt while
driving.
Non-observance of this instruction can lead to death or
serious injury.
During travel of the machine, the driver must have his
legs on the machine platform; there is a risk of injury
when the machine turns.
Longitudinal seat travel
• After raising the lever (3), it is possible to move the seat in
the longitudinal direction forward-rearward.
Seat cross travel
• After raising the lever (4), it is possible to move the seat in
the cross direction to the left and right.
Seat switch
The seat switch is located in the seat cushion.
If the driver is not sitting on the seat, the seat switch is deactivat-
ed and the operation of the machine is restricted in one of the
following ways – blocking of engine start, blocking of moving
off, stopping of the machine or switching off the engine.
These restrictions vary depending on:
• the time period for which the seat switch is deactivated,
• the position of the travel control (if it is in the parking brake
“P” position or outside this position)
Engine start blocking
If the driver is not sitting on the seat, engine start is blocked un-
less the travel control is in the parking brake position (P).
To enable engine start, sit on the seat and set the travel control
to the parking brake position (P).