Ammann 5953002 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 194

Ammann 5953002 Скачать руководство пользователя страница 55

49

ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i

OPERATING MANUAL

Travel control – right (standard) (11)

The travel control is used to set the engine speed, the parking

brake, forward/reverse direction and the travel speed of the ma-

chine. Direction and speed of machine travel is controlled by

shifting the control from zero position (0) forward or backward.

The travel speed corresponds to the displacement of the travel

control at the set speed gear. The travel control is fixed in the set

position except for the zero position (0).
The travel control can activate the so-called panic response

(Chapter 2.7.2).
Shifting the control to the neutral position (N) stops the machi-

ne.

If you leave the travel lever in the neutral position (N),

it is possible that the machine will move from the slope

due to leakages of the hydraulic system.

The parking brake position (P) is indicated by lighting up of the

parking brake indicator lamp.
The travel control is fitted with vibration, drum sprinkling, edge

cutter (up/down) and edge cutter sprinkling switches.

P – Parking brake – parking brake of the machine enabled
N – Neutral – the machine is not braked
0 – Zero position
F – Forward travel
R – Reverse travel

Travel control – left (optional)

The travel control is used to set the engine speed, the parking

brake, forward/reverse direction and the travel speed of the ma-

chine. Direction and speed of machine travel is controlled by

shifting the control from zero position (0) forward or backward.

The travel speed corresponds to the displacement of the travel

control at the set speed gear. The travel control is fixed in the set

position except for the zero position (0).
The travel control can activate the so-called panic response

(Chapter 2.7.2).
Shifting the control to the neutral position (N) stops the machi-

ne.

If you leave the travel lever in the neutral position (N),

it is possible that the machine will move from the slope

due to leakages of the hydraulic system.

The parking brake position (P) is indicated by lighting up of the

parking brake indicator lamp.
The travel control is fitted with vibration and drum sprinkling.

P – Parking brake – parking brake of the machine enabled
N – Neutral – the machine is not braked
0 – Zero position
F – Forward travel
R – Reverse travel

Note

If requested by the customer, the machine can be equipped

with the second travel control (11) placed on the left armrest.

However, only one of travel controls (11) may remain active.

For the machine travel using one of the controls (the active one),

the inactive travel control must be set to the parking brake po-

sition (P). If the inactive control is deflected from the parking

brake position (P), the machine will stop. When the machine is

stopped, move both of the travel controls (11) to the parking

brake position (P) and then select the driving direction on the

active travel control (11).

«
...
53
54
55
56
57
...
»

Содержание 5953002



































































































































































































Отзывы:

Нет отзывов