Ammann 5953002, Руководство по эксплуатации

Страница: 30 / 194

24 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
2.1 Main safety precautions
• After a warning alarm, the operator may put the machine
into operation only when all workers have left the endan-
gered area. During operation of the machine it is necessary
to follow safety instructions and not to carry out any activity
that might endanger the work safety; the operator must be
fully engaged in driving the machine. He must always sit on
the seat while driving the machine.
• The driver must comply with technological procedures of
works or instructions of a responsible worker.
• When rolling (traversing) the machine within the workplace,
he must adapt the driving speed to terrain conditions, the
work performed and weather conditions. He must watch
continuously the clearance to avoid collision with any ob-
struction.
• If the operator finishes or interrupts operation of the ma-
chine and leaves the machine, he must carry out safety
measures against unauthorized use of the machine and
undesired start up. The operator must remove the key from
the ignition box, lock the cab and disconnect the electrical
installation using the disconnector.
• When the operation is completed, he must park the ma-
chine at a suitable parking place (flat, bearing surface) so as
not to endanger stability of the machine; the machine must
not interfere with traffic roads, must not be exposed to fall-
ing objects (rocks), and must be protected against any natu-
ral disaster of another kind (floods, landslides, etc.).
• When parking the machine on roads, the measures accord-
ing to road traffic regulations shall be taken. The machine
must be marked properly.
• After finishing the work with the machine, all of the defects,
damages to the machine and any repairs made must be re-
corded in the operation logbook. When the operators take
turns, one operator is obliged to report any identified facts
to the other operator.
• The operator must use personal protective equipment –
work clothes, work shoes, protective helmet and protective
goggles.
•
He must equip the machine with accessories and equip-
ment as prescribed.
•
He must keep the operator’s stand, foot rests and walkways
clean.
• He must keep the machine free of oil contaminants and in-
flammable materials.
• If the machine could come into contact with high voltage,
the following principles must be observed:
- try to leave the hazardous zone with the machine;
- do not leave the operator’s stand;
- warn the others to keep off and not touch the machine.
2.1.3 Driver's obligations
• Before starting operation of the machine, the machine op-
erator is obliged to get familiar with instructions stated in
the documentation supplied together with the machine,
especially with safety precautions, and strictly observe the
instructions. This also applies to the personnel in charge of
maintenance, adjustments and repairs of the machine. (In
case you do not understand some parts of the manuals, con-
tact the nearest dealer or the manufacturer.)
•
He may drive the machine only if he is fully familiarized with
all functions of the machine and working and operating el-
ements and knows precisely how to operate the machine.
•
He is obliged to follow the safety symbols placed on the ma-
chine and keep them legible.
• Before starting the work, the operator must get familiar with
the workplace environment, i.e. with obstructions, slopes,
utility line system and with necessary types of workplace
protections with respect to the surroundings (noise, vibra-
tion, etc.).
• The operator while working with the machine must be fas-
tened with the safety belt.
•
The safety belt and its brackets must not be damaged.
• When there is a risk to health, human life, property, failures,
during hardware accidents, or there are symptoms of such
risks during operation, the operator must stop his work and
secure the machine against undesired starting, communi-
cate this to a responsible worker and to a possible extent
notify all the persons exposed to such hazard.
• Before starting operation of the machine, the operator is
obliged to get familiar with the records and operating de-
viations found out during the previous work shift.
•
Before starting the work, he must inspect the machine, ac-
cessories, check up control elements, communication and
safety devices, whether they are operable according to the
manual. If he finds a defect that might endanger the safety
of work and is not able to repair it, he must not put the ma-
chine into operation and must report the defect to the re-
sponsible worker.
•
If the operator finds a defect during operation, he must im-
mediately stop the machine and secure it safely against un-
desirable starting.
• During operation the operator must watch the machine run
and record any detected defects into the operation logbook.
• The operator must maintain an operation logbook which is
meant for records of machine acceptances and take-overs
carried out between operators, of defects and repairs done
during operation and keeping files of serious events during
the work shift.
•
Before putting the machine into operation, he must check
the brakes and steering for functioning.
• Before the engine is put into operation, both travel controls
must be in the parking position (P); no persons are allowed
to stay within dangerous reach of the machine.
• The driver must always notify the others each time the ma-
chine is put into operation with the help of a sound or light
signal before starting the engine of the machine.