Ammann 5953002 Скачать руководство пользователя страница 28

Страница: 28 / 194

ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i

2.1 Main safety precautions

2.1.1.3 Ensurance of safety measures by the

provider

•

He must ensure that the machine is operated only under

conditions and only for purposes it is technically capable of

according to conditions specified by the manufacturer and

respective standards.

•

He must ensure that the machine is used only in such a way

and in such a workplace where there is no risk of transmis-

sion of dangerous vibrations and damage to nearby facili-

ties, etc.

•

He must ensure a regular inspection of operation and techni-

cal condition, and regular machine maintenance in intervals

according to the lubrication and maintenance instructions.

If the technical condition of the machine does not meet re-

quirements to such an extent that the machine endangers

safety of operation, persons and property, or damages and

impairs the environment, it must be put out of service until

the defects are removed.

•

He must specify who is allowed to carry out operation, main-

tenance and repairs of the machine as well as what activities

can be carried out in such cases.

•

Every person who drives the machine or performs mainte-

nance and repairs of the machine must be familiarised with

instructions stated in the operating manual of the machine.

•

He must ensure that the fire extinguisher is checked on

regular basis.

•

He must ensure that the "Operating manual" is available at

a designated location in the machine.

•

He must ensure continuous supervision by an appointed

person during machine operation on public roads and is li-

able in particular for releasing instructions to ensure health

protection and work safety.

•

He must ensure that dangerous substances (fuel, oils, cool-

ant, etc.) must be removed from places of leakage according

to their nature to avoid their adverse impact on the environ-

ment, safety of operation and human health.

2.1.1.4 Protective frame ROPS

When the protection frame ROPS is used:

•

the machine frame must not be damaged (broken, bent,

etc.) in the connection point

•

the protective ROPS frame itself must not show corrosion,

cracks or breaks

•

the protective ROPS frame must not be loose during opera-

tion of the machine

•

all bolted connections must meet requirements of the spec-

ification and must be tightened to the specified torque

•

bolts must not be damaged, distorted and must not show

rust marks.

•

Additional modifications must not be carried out on the

protective ROPS frame without the approval of the manu-

facturer because they can result in decrease of its strength

(e.g. holes, welding, etc.).

•

The machine weight must not exceed the maximum permis-

sible weight according to the protective ROPS frame.

Содержание 5953002



































































































































































































Результаты поиска

Содержание 5953002

Отзывы:

Ammann 5953002, Руководство по эксплуатации, Страница: 28 / 194

Результаты поиска

Содержание 5953002

Отзывы: