Ametek 5100 HD, Руководство пользователя

Страница: 115 / 134

Maintenance
|
6-15
39
System Alarm/Warning bit map
When System Status (parameter 129, 16-bit integer, modbus register 117) contains none-zero value,
the bit map of System Alarms and System Warning (parameter 125, 126, 127, 128; 32-bit integer,
modbus register 109, 110, 111, 112, 113) contains system alarms as defined:
Modbus
register
Bit Display message Alarm
type
Related
Parameter ID
Description
109 1
“TEC Hi Limit Alrm”
Alarm 181, 183, 188 Temperature of the TEC#1 (181) is
outside of a band set by parameter 183
around the setpoint (188)
109 2
“TEC Lo Limit Alrm”
Alarm
109 3
“TEC2 Hi Limit Alrm”
Alarm 374, 376, 381 Temperature of the TEC#2 (374) is
outside of a band set by parameter 376
around the setpoint (381)
109 4 “TEC2 Lo Limit Alrm” Alarm
109 5
“Cell Hi Limit Alrm”
Alarm 192, 193, 194 Cell temperature (192) is outside of a
band set by parameter 194 around the
setpoint (193)
109 6 “Cell Lo Limit Alrm” Alarm
109 7
“Pres Hi Limit Alrm”
Alarm 244, 236, 237 Pressure transducer reading (244) is
outside of a band set by min/max
pressure (236, 237)
109 8
“Pres Lo Limit Alrm”
Alarm
109 9
“Seal Hi Limit Alrm”
Alarm 366, 369, 370 For ATEX ONLY: SEAL pressure (366)
is outside of a band set by min/max
pressure (369, 370)
109 10
“Seal Lo Limit Alrm”
Alarm
109 11 "File error" Alarm File system error, reported in system
alarm (125)
109 12 "Internal error" Alarm Internal harware error
111 13 “TEC temp drift” Warning 181, 197, 198,
276
TEC temperature (181) drifts out of
factory setting window (197, 198)
defined by the factory default (276)
111 14 “TEC2 temp drift” Warning 381, 213, 214,
395
TEC temperature 2 (381) drifts out of
factory setting window (213, 214)
defined by the factory default (395)
111 15 "Conc. Out of range" Warning Concentration reading from cell #1 is out
of calibration range
111
16 "Conc. Out of range 2" Warning Concentration reading from cell #2 is
out of calibration range
111 17 "Lowlight in Sample" Warning Laser intensity in sample cell is low
111 18 "Battery failed" Warning Internal battery failure
111 19 "Lowlight in Ref" Warning Laser intensity in reference cell is low
111
20 "Ref conc alarm" Warning Concentration in reference cell is low
111 21 "Conc. Band 1" Warning Concentration alarm from band 1
(channel 1)
111 22 "Conc. Band 2" Warning Concentration alarm from band 2
(channel 1)
111 23 "Conc. Band 3" Warning Concentration alarm from band 3
(channel 1)
111 24 "Conc. Band 4" Warning Concentration alarm from band 4
(channel 1)
111 25 "Conc. Band 1" Warning Concentration alarm from band 1
(channel 2)
111 26 "Conc. Band 2" Warning Concentration alarm from band 2
(channel 2)
111
27 "Conc. Band 3" Warning Concentration alarm from band 3
(channel 2)
111
28 "Conc. Band 4" Warning Concentration alarm from band 4
(channel 2)
111
29 "Data Invalid" Warning 122, 363 Concentration reading is invalid.
Possible causes include: system in line -
lock, system in calibration, etc...
System Alarm/Warning bit map
When System Status (parameter 129, 16-bit integer, modbus register 117) con -
tains none-zero value, the bit map of System Alarms and System Warning (pa -
rameter 125, 126, 127, 128; 32-bit integer, modbus register 109, 110, 111, 112,
113) contains system alarms as defined:
40
111 30
“Cell pres Hi”
Warning 254, 495, 496 Cell pressure (254) is outside of a band
set by min/max pressure (495, 496)
111 31
“Cell pres Low”
Warning
111 32 "Span error" Warning Error in span calibration
112 1 "Zero error" Warning Error in zero calibration
113
2 "User error" Warning User error detected from the user analog
input
Common Modbus Registers
ID Access Data
Type
mnemonic MB
Starting
Regs
MB Reg
Size
Description
6 rs char[20] SERIAL 0 10 Serial Number
7 rs char[6] MAC 10 3 MAC address
8 rws uint IP 13 2 IP Address
9 rws uint SUBNET 15 2 IP Subnet Mask
10
rws uint GW 17 2 Gateway
11
rws uint DNS 19 2 DNS
12
rws uint16 DHCPE 21 1 DHCP enable. 1=disabled, 2=enabled
13
rws uint16 TCPE 22 1 TCP Enable. 0=disabled, 1=enabled
14
rws uint SVRIP 23 2 Server IP
100 rwf int16 CFGFILEVER 25 1 Version of the params.xml file generated by
this
101
r char[20] VERSION 26 10 Software Version
102 r char[20] NAME 36 10 Model Name
103 rw uint IU1BAUD 46 2 Internal UART1baud rate (MODBUS)
104 rwf uint IU2BAUD 48 2 Internal UART2 baud rate (DISPLAY)
105 rwf uint EU1BAUD 50 2 External UART1 baud rate (RS232)
106 rwf uint EU2BAUD 52 2 External UART2 baud rate
107 r uint16 FWVERHRB 54 1 Interface Board FW version
108 r uint16 CARDID 55 1 0x20: HC121, 0x40: HC122
109 rw int16 MBPARITY 56 1 Parity. 0=none, 1=even, 2=odd
110 rwf int16 MBSTOPBIT 57 1 Stop bits. 1=1 stop bits, 2=2 stop bits
111 rw uint16 MBUSADD 58 1 Modbus Address
112 rwf uint16 MBUSPORT 59 1 Modbus Port. 0=Disable, 1=Enable
113 rwf uint MBUSTO 60 2 Modbus Timeout (ms)
114
r char[20] SYSTIME 62 10 System Time
115
r char[20] SYSDATE 72 10 System Date
117
rw char[20] CONCUNIT 83 10 Concentration Unit of Measure for analyte 1
120
rw char[10] PRESUNIT 95 5 Pressure Unit of Measure, case sensitive.
Valid strings include psi, psia, inH20, inHg,
bar, cmH20, kg/cm2, kPa, mbar, micron,
mmHg, oz/in2, torr, atm
121 rw char[10] TEMPUNIT 100 5 Temp Unit of Measure, case sensistive. Valid
strings include degreeC, degreeF, degreeK
122 r uint DATAVALID 105 2 Data Valid. 0=Not Valid, 1=Valid
123 r int16 DMODE 107 1 0=Line- lock mode, 1=Sample, 2=Calib
125 r uint SYSALARM1 109 2 Bit - mapped system alarms
126 r uint SYSALARM2 111 2 Bit - mapped system alarms
127
r uint USERALARM 113 2 Bit - mapped system alarms
128
r uint CONCALARM 115 2 Bit mapped concentration alarms