Ametek 5100 HD, Руководство пользователя

Страница: 106 / 134

6-6 | Model 5100 HD Analyzer
29
116 r int16 MANCMD 82 1 Parameter used to request a state
machine change. 1=Not ready,
2=Measure, 3=Zero, 4=Span, 5=Zero
Hold, 6=Span Hold, 7=Idle
117 rw char[20] CONCUNIT 83 10 Concentration Unit of Measure for
analyte 1
118 rw int16 FLOATFRMT 93 1 Float Format index. 0=comma as
decimal, 1=period as decimal
119 rw uint16 IDATEFRMT 94 1 International date format index.
0=MM\DD\ YYYY, 1=MM- DD -YYYY,
2=DD\MM\ YYYY, 3=DD- MM -YYYY
120
rw char[10] PRESUNIT 95 5 Pressure Unit of Measure, case
sensitive. Valid strings include psi,
psia, inH20, inHg, bar, cmH20,
kg/cm2, kPa, mbar, micron, mmHg,
oz/in2, torr, atm
121
rw char[10] TEMPUNIT 100 5 Temp Unit of Measure, case
sensistive. Valid strings include
degreeC, degreeF, degreeK
122 r uint DATAVALID 105 2 Data Valid. 0=Not Valid, 1=Valid
123 r int16 DMODE 107 1 0=Line- lock mode, 1=Sample,
2=Calib
124 rwf int16 COMPPT 108 1 Pressure and temp compensation.
0=none, 1=pressure, 2=temperature,
3=both
125
r uint SYSALARM1 109 2 Bit - mapped system alarms
126 r uint SYSALARM2 111 2 Bit - mapped system alarms
127 r uint USERALARM 113 2 Bit - mapped system alarms
128 r uint CONCALARM 115 2 Bit mapped concentration alarms
129 r int16 SYSSTATUS 117 1 System Status. 0=Everything ok, Not
0=something is wrong
130 r int16 SYSSTATE 118 1 System State. 100=Not Ready,
201=Measure Run, 502=Idle,
600=diag
131 r uint TOTUPTIME 119 2 Total uptime in seconds
132 r uint UPTIME 121 2 Uptime in seconds
133 r float CELLTEMPD 123 2 Cell temp for display
134
r float ANAOUT1 125 2 Current Output 1
135
rw float ANAOUT1O 127 2 Current Output 1 Offset
136
rw uint16 ANAOUT1P 129 1 Current Output 1 Parameter
137 rw float ANAOUT1S 130 2 Current Output 1 Span
138 rw int16 ANAOUT1T 132 1 Current Output 1 Output Type. 0=4-
20 mode, 1=0 - 20 mode.
If overange enable (ANAOUT1OR =
1)
0 = 3.78 - 20.5, 1 = 0 - 20.5, high or
low values can also be set by fault
value, See Fault option (ANAOUT1F)
139 rw uint16 ANAOUT1OR 133 1 Current Output 1 Over range Enable.
0=disabled, 1=enabled
140
rw uint16 ANAOUT1F 134 1 Current Output 1 Fault Option. 0=No
fault, 1=Low fault, 2=High fault.
If high fault (2):
High end of range becomes 22 mA
Output ratio becomes 1
If low fault (1) AND in 4- 20 mode
(ANAOUT1T = 0):
Low end of range becomes 3 mA
Output ratio bec omes 0.
30
141
r float ANAOUT2 135 2 Current Output 2 -
142
rw float ANAOUT2O 137 2 Current Output 2 Offset -
143 rw uint16 ANAOUT2P 139 1 Current Output 2 Parameter-
144 rw float ANAOUT2S 140 2 Current Output 2 Span -
145 rw int16 ANAOUT2T 142 1 Current Output 2 Output Type. 0=4-
20 mode, 1=0 - 20 mode.
If overange enable (ANAOUT2OR =
1)
0 = 3.78 - 20.5, 1 = 0 - 20.5, high or
low values can also be set by fault
value, See Fault option (ANAOUT2F)
-
146 rw uint16 ANAOUT2OR 143 1 Current Output 2 Over range Enable.
0=disabled, 1=enabled
147 rw uint16 ANAOUT2F 144 1 Current Output 2 Fault Option. 0=No
fault, 1=Low fault, 2=High fault.
If high fault (2):
High end of range becomes 22 mA
Output ratio becomes 1
If low fault (1) AND in 4- 20 mode
(ANAOUT2T = 0):
Low end of range becomes 3 mA
Output ratio becomes 0.
148 r uint16 RELAY1 145 1 Relay 1. 0=OPEN, 1=CLOSED
149
rw uint16 RELAY1D 146 1 Relay 1 Delay. Holds the relay output
for this set amount of time.
150
rw uint16 RELAY1F 147 1 Relay 1 Function. 0=Disabled,
1=Concentration, 3=Data Valid,
4=System alarm
151 rw uint16 RELAY1S 148 1 Relay 1 Source. The source
parameter number used to evaluated
the relay function.
152 rw float RELAY1V 149 2 Relay 1 Value. The value used to
evaluate the relay function.
153
r uint16 RELAY2 151 1 Relay 2. 0=OPEN, 1=CLOSED
154
rw uint16 RELAY2D 152 1 Relay 2 Delay. Holds the relay output
for this set amount of time.
155 rw uint16 RELAY2F 153 1 Relay 2 Function. 0=Disabled,
1=Concentration, 3=Data Valid,
4=System alarm
156 rw uint16 RELAY2S 154 1 Relay 2 Source. The source
parameter number used to evaluated
the relay function.
157 rw float RELAY2V 155 2 Relay 2 Value. The value used to
evaluate the relay function.
158
r uint16 RELAY3 157 1 Relay 3. 0=OPEN, 1=CLOSED
159 rw uint16 RELAY3D 158 1 Relay 3 Delay. Holds the relay output
for this set amount of time.
160
rw uint16 RELAY3F 159 1 Relay 3 Function. 0=Disabled,
1=Concentration, 3=Data Valid,
4=System alarm
161 rw uint16 RELAY3S 160 1 Relay 3 Source. The source
parameter number used to evaluated
the relay function.
162 rw float RELAY3V 161 2 Relay 3 Value. The value used to
evaluate the relay function.
163 r uint16 RELAY4 163 1 Relay 4. 0=OPEN, 1=CLOSED