Ametek 5100 HD, Руководство пользователя

Страница: 117 / 134

Maintenance
|
6-17
41
129 r int16 SYSSTATUS 117 1 System Status. 0=Everything ok, Not
0=something is wrong
130 r int16 SYSSTATE 118 1 System State. 100=Not Ready, 201=Measure
Run, 502=Idle, 600=diag
133 r float CELLTEMPD 123 2 Cell temp for display
134 r float ANAOUT1 125 2 Current Output 1
135 rw float ANAOUT1O 127 2 Current Output 1 Offset
136 rw uint16 ANAOUT1P 129 1 Current Output 1 Parameter
137 rw float ANAOUT1S 130 2 Current Output 1 Span
138 rw int16 ANAOUT1T 132 1 Current Output 1 Output Type. 0=4- 20 mode,
1=0 - 20 mode.
If overange enable (ANAOUT1OR = 1)
0 = 3.78 - 20.5, 1 = 0 - 20.5, high or low
values can also be set by fault value, See
Fault option (ANAOUT1F)
139 rw uint16 ANAOUT1OR 133 1 Current Output 1 Over range Enable.
0=disabled, 1=enabled
140 rw uint16 ANAOUT1F 134 1 Current Output 1 Fault Option. 0=No fault,
1=Low fault, 2=High fault.
If high fault (2):
High end of range becomes 22 mA
Output ratio becomes 1
If low fault (1) AND in 4- 20 mode
(ANAOUT1T = 0):
Low end of range becomes 3 mA
Output ratio bec omes 0.
141 r float ANAOUT2 135 2 Current Output 2 -
142
rw float ANAOUT2O 137 2 Current Output 2 Offset -
143
rw uint16 ANAOUT2P 139 1 Current Output 2 Parameter-
144
rw float ANAOUT2S 140 2 Current Output 2 Span -
145 rw int16 ANAOUT2T 142 1 Current Output 2 Output Type. 0=4- 20 mode,
1=0 - 20 mode.
If overange enable (ANAOUT2OR = 1)
0 = 3.78 - 20.5, 1 = 0 - 20.5, high or low
values can also be set by fault value, See
Fault option (ANAOUT2F) -
146 rw uint16 ANAOUT2OR 143 1 Current Output 2 Over range Enable.
0=disabled, 1=enabled
147 rw uint16 ANAOUT2F 144 1 Current Output 2 Fault Option. 0=No fault,
1=Low fault, 2=High fault.
If high fault (2):
High end of range becomes 22 mA
Output ratio becomes 1
If low fault (1) AND in 4- 20 mode
(ANAOUT2T = 0):
Low end of range becomes 3 mA
Output ratio becomes 0.
148 r uint16 RELAY1 145 1 Relay 1. 0=OPEN, 1=CLOSED
149 rw uint16 RELAY1D 146 1 Relay 1 Delay. Holds the relay output for this
set amount of time.
150 rw uint16 RELAY1F 147 1 Relay 1 Function. 0=Disabled,
1=Concentration, 3=Data Valid, 4=System
alarm
151 rw uint16 RELAY1S 148 1 Relay 1 Source. The source parameter
number used to evaluated the relay function.
152 rw float RELAY1V 149 2 Relay 1 Value. The value used to evaluate
the relay function.
153 r uint16 RELAY2 151 1 Relay 2. 0=OPEN, 1=CLOSED
42
154 rw uint16 RELAY2D 152 1 Relay 2 Delay. Holds the relay output for this
set amount of time.
155 rw uint16 RELAY2F 153 1 Relay 2 Function. 0=Disabled,
1=Concentration, 3=Data Valid, 4=System
alarm
156
rw uint16 RELAY2S 154 1 Relay 2 Source. The source parameter
number used to evaluated the relay function.
157 rw float RELAY2V 155 2 Relay 2 Value. The value used to evaluate
the relay function.
158 r uint16 RELAY3 157 1 Relay 3. 0=OPEN, 1=CLOSED
159
rw uint16 RELAY3D 158 1 Relay 3 Delay. Holds the relay output for this
set amount of time.
160 rw uint16 RELAY3F 159 1 Relay 3 Function. 0=Disabled,
1=Concentration, 3=Data Valid, 4=System
alarm
161
rw uint16 RELAY3S 160 1 Relay 3 Source. The source parameter
number used to evaluated the relay function.
162 rw float RELAY3V 161 2 Relay 3 Value. The value used to evaluate
the relay function.
163 r uint16 RELAY4 163 1 Relay 4. 0=OPEN, 1=CLOSED
164 rw uint16 RELAY4D 164 1 Relay 4 Delay. Holds the relay output for this
set amount of time.
165 rw uint16 RELAY4F 165 1 Relay 4 Function. 0=Disabled,
1=Concentration, 3=Data Valid, 4=System
alarm
166
rw uint16 RELAY4S 166 1 Relay 4 Source. The source parameter
number used to evaluated the relay function.
167 rw float RELAY4V 167 2 Relay 4 Value. The value used to evaluate
the relay function.
168 rwf boolean RELAYENA 169 1 Master enable for all relays. 0=Disabled,
1=Enabled
169
rwf char[20] ALYTE1 170 10 Analyte 1 Name
170 r float ALYTE1CON 180 2 Analyte 1 Concentration
179 rwf char[20] ALYTE2 198 10 Analyte 2 Name
180 r float ALYTE2CON 208 2 Analyte 2 Concentration
181 r float TECTEMP 210 2 TEC Temperature Value
192 r float CELLTEMP 231 2 Cell Temperature value
200 rw char[10] CONCUNIT2 247 5 Concentration Unit of Measure for analyte 2
201 rw uint ALYTE1RES 252 2 Decimal places to use for displaying analyte 1
202
rw uint ALYTE2RES 254 2 Decimal places to use for displaying analyte 2
203
rw boolean RELAY1NC 256 1 Normally closed indicator for relay 1.
1=Normally closed, 0=Normally open
204 rw boolean RELAY2NC 257 1 Normally closed indicator for relay 2.
1=Normally closed, 0=Normally open
205 rw boolean RELAY3NC 258 1 Normally closed indicator for relay 3.
1=Normally closed, 0=Normally open
206 rw boolean RELAY4NC 259 1 Normally closed indicator for relay 4.
1=Normally closed, 0=Normally open
209 r uint SYSWARN1 262 2 Temporary cache to miror warnings in
SYSALARM1
210
r uint SYSWARN2 264 2 Temporary cache to miror warnings in
SYSALARM2
211 r uint SYSSTWARN 266 2 system statuc warning
215 rw float REFCONC_2 273 2 Concentration of Reference call
219 rw int16 ANAOUT1H 280 1 Analog output 1, 0 - follow source during cal,
1 - hold output during cal
220
rw int16 ANAOUT2H 281 1 Analog output 2, 0 - follow source during cal,
1 - hold output during cal L82