Ametek 5100 HD, Руководство пользователя

Страница: 108 / 134

6-8 | Model 5100 HD Analyzer
31
164 rw uint16 RELAY4D 164 1 Relay 4 Delay. Holds the relay output
for this set amount of time.
165 rw uint16 RELAY4F 165 1 Relay 4 Function. 0=Disabled,
1=Concentration, 3=Data Valid,
4=System alarm
166
rw uint16 RELAY4S 166 1 Relay 4 Source. The source
parameter number used to evaluated
the relay function.
167 rw float RELAY4V 167 2 Relay 4 Value. The value used to
evaluate the relay function.
168 rwf boolean RELAYENA 169 1 Master enable for all relays.
0=Disabled, 1=Enabled
169 rwf char[20] ALYTE1 170 10 Analyte 1 Name
170 r float ALYTE1CON 180 2 Analyte 1 Concentration
171 rw float CONCLIMITH1 182 2 Analyte 1 band high limite band 1
172 rw float CONCLIMITL1 184 2 Analyte 1 band low limite band 1
173 rw float CONCLIMITH2 186 2 Analyte 1 band high limite band 2
174 rw float CONCLIMITL2 188 2 Analyte 1 band low limite band 2
175 rw float CONCLIMITH3 190 2 Analyte 1 band high limite band 3
176 rw float CONCLIMITL3 192 2 Analyte 1 band low limite band 3
177
rw float CONCLIMITH4 194 2 Analyte 1 band high limite band 4
178
rw float CONCLIMITL4 196 2 Analyte 1 band low limite band 4
179
rwf char[20] ALYTE2 198 10 Analyte 2 Name
180
r float ALYTE2CON 208 2 Analyte 2 Concentration
181
r float TECTEMP 210 2 TEC Temperature Value
182 rwf int16 TECAT 212 1 Heater Actuator Type. 0=Reverse,
1=Forward.
183
rwf float TECDEVT 213 2 Heater Deviation Tolerance. Ignored if
0. Otherwise high or low limit alarm
are set when value is out bounds of 1
deviation
184 rwf float TECDT 215 2 Heater Deriviative Time
185 r float TECHDC 217 2 Heater Duty Cycle
186 rwf float TECIT 219 2 Heater Integral Time
187 rwf float TECPB 221 2 Heater Proportional Band
188 rwf float TECSP 223 2 Heater Set Point
189 rwf float TECST 225 2 TEC Sample Time
190 rwf float TECHYS 227 2 TEC hysterisi
191 r float ELECTEMP 229 2 Electronics Temperature
192 r float CELLTEMP 231 2 Cell RTD1 Filtered value
193
rwf float CELLSP 233 2 Cell Set Point
194
rwf float CELLDEVT 235 2 Cell Deviation Tolerance. Ignored if 0.
Otherwise high or low limit alarm are
set when value is out bounds of 1
deviation
195 rwf float NORMTEMP 237 2 Calibration temperature for
concentration compensation.
196
rwf float NORMPRES 239 2 Calibration pressure for concentration
compensation
197
rwf float MAXTEMP 241 2 Max TEC temperature
198
rwf float MINTEMP 243 2 Min TEC temperature
199
rw uint LOGSAVEINT 245 2 Interval in minutes to save the log
data
200
rw char[10] CONCUNIT2 247 5 Concentration Unit of Measure for
analyte 2
201 rw uint ALYTE1RES 252 2 Decimal places to use for displaying
analyte 1
32
202 rw uint ALYTE2RES 254 2 Decimal places to use for displaying
analyte 2
203 rw boolean RELAY1NC 256 1 Normally closed indicator for relay 1.
1=Normally closed, 0=Normally open
204
rw boolean RELAY2NC 257 1 Normally closed indicator for relay 2.
1=Normally closed, 0=Normally open
205
rw boolean RELAY3NC 258 1 Normally closed indicator for relay 3.
1=Normally closed, 0=Normally open
206
rw boolean RELAY4NC 259 1 Normally closed indicator for relay 4.
1=Normally closed, 0=Normally open
207 rw uint16 MENUTO 260 1 Menu timeout. The time that the menu
will navigate to the homescreen after
no activity. 0 is disabled
208 rw uint16 PWDTO 261 1 Password timeout. The time that a
user logged into the front display
menu will be logged out after no
activity. 0 is disabled
209 r uint SYSWARN1 262 2 Temporary cache to miror warnings in
SYSALARM1
210 r uint SYSWARN2 264 2 Temporary cache to miror warnings in
SYSALARM2
211 r uint SYSSTWARN 266 2 system statuc warning
212 rw uint16 PTSEED 268 1 The seed value for all IIR filters.
213 rwf float MAXTEMP_2 269 2 Max TEC temperature 2
214 rwf float MINTEMP_2 271 2 Min TEC temperature 2
215 rw float REFCONC_2 273 2 Concentration of Reference call
216 rwf int16 STATICPT 275 1 Pressure (STCELLP) and temp
(STCELLT) static value usage.
0=neither, 1=use static pressure,
2=use static temperature, 3= use both
217 rwf float STCELLT 276 2 Static cell temperature. Use by
setting STATICPT to 2 or 3
218 rwf float STCELLP 278 2 Static cell pressure. Use by setting
STATICPT to 1 or 3
219
rw int16 ANAOUT1H 280 1 Analog output 1, 0 - follow source
during cal, 1 - hold output during cal
220 rw int16 ANAOUT2H 281 1 Analog output 2, 0 - follow source
during cal, 1 - hold output during cal
L82
221 rwf float LASTH_2 282 2 Threshold in 2f signal
222 rwf float LASREFPWR_2 284 2 Reference Laser Power (power at
calib)
223 rwf float LASTS_2 286 2 Laser Sample Period in seconds
224 rwf float LASPWR_2 288 2 Laser Power
225 rwf float CELLLENGTH 290 2 Cell length, concentrations are
multiplied by this parameter
226 r int16 DIAGS 292 1 Used to change state to diagnostics
from the menu
227
rw float CONCMIN_2 293 2 Minimum Concentration
228 rw float CONCMAX_2 295 2 Maximum Concentration
229 rwf int16 PASSCODE 297 1 PASSCODE to change system
params
230
rwf float LASTH 298 2 Threshold in 2f signal
231
rwf float LASREFPWR 300 2 Reference Laser Power (power at
calib)
232
rwf float LASTS 302 2 Laser Sample Period in seconds
233
rwf float LASPWR 304 2 Laser Power