Ametek 5100 HD, Руководство пользователя

Страница: 81 / 134

User Interface
|
4-31
Data Type Description MB Starting
Regs
MB Reg Size
float Power correction alpha 634 2
int16 Beta value for wir filter 636 1
float Power correction Z value 637 2
float Duty cycle for the sample heater 639 2
float Power correction Z value 2 641 2
float Laser power of sample channel 643 2
float Laser power reference of sample channel 645 2
float Laser power of sample channel 2 647 2
float Laser power reference of sample channel 2 649 2
float concentration span 651 2
float concentration offset 653 2
float concentration span 2 655 2
float concentration offset 2 657 2
float span ratio 659 2
float span ratio 2 661 2
int16 status of span check 663 1
int16 status of span check 664 1
float zero check 665 2
float zero check 667 2
int16 status of zero check 669 1
int16 status of zero check 670 1
float For span check - warning limit 671 2
float For span check - alarm limit 673 2
float Zero tolerance (of calib range) 675 2
int16 (NOT USED) 677 1
int16 (NOT USED) 678 1
int16 (NOT USED) 679 1
int16 (NOT USED) 680 1
float (NOT USED) 681 2
float (NOT USED) 683 2
float (NOT USED) 685 2
int16 Auto calibration. 0=disabled, 1=enabled. 687 1
int16 0=Zero+Span, 1=Zero, 2=Span 688 1
int16 The last day that the calibration was triggered
by the scheduler
689 1
int16 Cal period in second 690 1
boolean 1=perform autocal immediately 691 2
float (NOT USED) 693 2
float (NOT USED) 695 2
int16 0=do not adjust auto cal; 1=adjust auto cal 697 1
int16 (NOT USED) 698 1
int16 System State (Laser 2). 100=Not Ready,
201=Measure Run, 502=Idle, 600=diag...
699 1