Ametek 5100 HD, Руководство пользователя

Страница: 79 / 134

User Interface
|
4-29
Data Type Description MB Starting
Regs
MB Reg Size
float Heater Proportional Band 492 2
float Cell Sample Time 494 2
float Heater Deriviative Time 496 2
float Heater Duty Cycle 498 2
float Heater Integral Time 500 2
float Heater Proportional Band 502 2
float Heater Set Point 504 2
float Ref Sample Time 506 2
int16 Midpoint of the DAC range for TEC control 508 1
float Pressure compensation coefficient 1 509 2
float Pressure compensation coefficient 2 511 2
float Pressure compensation coefficient 3 513 2
float Pressure compensation coefficient 4 515 2
float Analyte 1 Concentration in other unit 517 2
char[20] 2nd Concentration Unit of Measure for analyte
1
519 10
uint Data Valid. 0=Not Valid, 1=Valid 529 2
int16 0=Line-lock mode, 1=Sample, 2=Calib 531 1
int16 Pressure and temp compensation. 0=none,
1=pressure, 2=temperature, 3=both
532 1
float Process seal pressure span 533 2
float Process seal pressure offset 535 2
float Process seal pressure IIR 537 2
float Process seal max 539 2
float Process seal min 541 2
float Sample channel's threshold 543 2
float Sample channel 2's threshold 545 2
float 0=single, 1=dual concentration from one
spectrum
547 2
float TEC Temperature Value 549 2
int16 Heater Actuator Type. 0=Reverse, 1=Forward. 551 1
float Heater Deviation Tolerance. Ignored if 0.
Otherwise high or low limit alarm are set when
value is out bounds of 1 deviation
552 2
float Heater Deriviative Time 554 2
float Heater Duty Cycle 556 2
float Heater Integral Time 558 2
float Heater Proportional Band 560 2
float Heater Set Point 562 2
float TEC Sample Time 564 2
float TEC hysterisi 566 2