Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 84 / 206

76 Installing Amanda@Work.Place
The Remote program works only with COM1 or COM2, with industry standard IRQ and
I/O port addressing. That is:
COM1 with IRQ4 and not other devices on COM1 or using IRQ4
COM2 with IRQ3 and not other devices on COM2 or using IRQ3
To control Amanda via modem:
1. Use the following command to start the Remote program:
remote /x
where x is 1 or 2, depending on what COM port the cable is connected to on the
remote computer. (For COM1, you can use /1 or nothing at all because COM1 is the
default.)
You execute the command from the directory in which the Remote program is stored
or you add the path name to the command. For example, if the program is stored in
the UTIL directory on your C: drive, C:\UTIL\REMOTE would replace REMOTE in
the command. If the computer runs a version of Windows, run the command from a
DOS box.
2. Press Enter.
The following appears on the screen:
Remote Version 2.0
Enter phone number:
3. Type the telephone number for Amanda, then press Enter.
For example, if both modems are on the station side of the telephone switching sys-
tem, you might use 9,17147530414,,,,,102 where the commas are two-second pauses
and the 102 is for mailbox 102. In this example, the Extension field for mailbox 102
would have to be 102H to achieve a blind transfer to extension 102.
Enter password: appears on the screen.
4. Type JENNIFER in uppercase letters, then press Enter.
You can run Setup and other programs on Amanda’s computer while sitting at the
remote computer. (If the screen is blank because of Amanda’s screen saver, press the
spacebar to exit the screen saver.)
5. When you have finished, type Alt+X to end the connection.
The program asks you to confirm your decision to exit by typing Y.
The remote computer disconnects from Amanda.