Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 71 / 206

Chapter 9: Using Serial Integration 63
11. In the SMDI section of Advanced Configuration, change
smdi_port 0
To:
smdi_port n
where n is the number for n in step 6.
12. Verify that the smdi_type option is:
smdi_type 'smdi'
Change it if necessary.
13. Modify
smdi_base_port 1
if the first port on the telephone switching system is
not identified as the logical port 1. For example, some telephone switching systems
use the port’s extension or another logical terminal number to identify the port. The
first port may be extension 241, with the second port 242, etc.
These numbers must
be consecutive. For example, if the first or base port is 241, you use
smdi_base_port 241
.
14. You can also set
smdi_pretimeout n
, where n is the maximum number of sec-
onds that an SMDI packet can precede the forwarded call. The default is 50.
15. You can also set
smdi_delay n
, where n is the number of tenths of seconds that
Amanda waits after the call is answered before looking for integration information.
This allows more than one packet to be sent to a port per telephone call. Amanda uses
the last (most recent) packet. The default is 0. The range is 0 to 255.
16. Press F10 to save your changes.
The Save All Data? dialog box appears.
17. Press Y for Yes.
N
OTE
: The smdi_max, smdi_start, smdi_stop, and smdi_term configuration op-
tions do not apply to telephone switching systems that use Bellcore Stan-
dard SMDI.