Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 53 / 206

Chapter 7: Configuring Amanda 45
Configuring a New Installation
Amanda has over 200 configuration options. They are what make Amanda so powerful
and flexible. You will probably leave over 90% of those options set to their default
settings. However, armed with the answers to the First Use Questionnaire, you should
review the most commonly changed options (those in the General Configuration section
of the Setup utility).
To set a new Amanda system’s general configuration options:
1. Run Setup as explained in “Chapter 3: Running the Setup Utility.”
The Work.Place Configuration Utility screen appears.
2. To select System Configuration Options, press 4.
The System Configuration menu appears.
3. To select General Configuration, press Enter.
The General Configuration menu provides easy access to the configuration options
you are most likely to change.
4. Press I for Incoming Calls.
The Incoming Calls screen appears.
Options with bracketed settings [T] or [F] are like Windows check boxes. Using T for
True is like checking a check box. Using F for False is like clearing a check box.
Pressing the space bar toggles between T and F. Sometimes one check box is depen-
dent on your selection for an earlier check box. For example, in the Incoming Calls
screen, if you do not allow the caller to hold, the setting for active hold is ignored.
Options with settings that are in parentheses (*) or ( ) are like Windows option but-
tons. You make a selection from the group of options by typing an asterisk in front of
any one of the options. (Typing a space removes an asterisk from one option; if there
are only two options, the asterisk automatically moves to the other option.)
5. For each check box, select T for True or F for False.