Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 66 / 206

58 Installing Amanda@Work.Place
N
OTE
: Remember to insert the FREQ1 value of 1100 into the filter table in one
of the first four positions. Only frequencies in the first four positions are
used for terminating tones.
Creating the Hot Box Mailbox
The Amanda Company recommends using mailbox 994 as the first hot_box, but you can
use any valid mailbox. Use Amanda’s Mailbox screen to create the mailbox that will
process the PCPM tone. See
Administering Amanda@Work.Place for information about
creating mailboxes.
After calling Amanda, the caller presses the Start button on his fax machine during the
Company greeting (or some other greeting). Amanda recognizes the tone and processes
mailbox 994. Mailbox 994 performs a blind transfer to the fax machine. The Extension
field for mailbox 994 must contain the extension connected to the fax machine followed
by an H (hangup).
Example Extension field:
1000H
where extension 1000 is connected to the fax machine
Setting the Hot Box Options
You must let Amanda know the mailbox that will process the PCPM tone by setting the
hot_box configuration option.
To designate a mailbox to accept incoming faxes:
1. Run the Setup utility. At the DOS prompt, from the directory C:\AMANDA, type:
SETUP
Then press Enter.
2. From the main menu, press 4.
The System Configuration Options menu appears.
3. From the System Configuration menu, type:
A
(for Advanced Configuration).
4. From the Advanced Configuration menu, type:
H
(for Hot Boxes).
5. Select the number that corresponds to the PCPM code.
6. Type the mailbox number next to the code.
Your typing replaces previous setting (by default -1 for no mailbox).
7. Press F10 to save.