Alto-Shaam CT Express Combitherm CTX4-10E, Руководство по установке

Страница: 26 / 52

Installation
26 MN-29805 • Rev 11 • 07/18 • Combitherm CT Express Installation Manual
How to connect the oven to the water supply and install the
spray hose
Before you begin
▪
Flush the water line at the installation site.
▪
Install a manual water shut-off valve between the main cold water supply line(s) and the
supply lines to the oven.
▪
Install a check‑valve or other anti‑backflow/anti‑siphon device on all inlet water lines
in accordance with and as required by national, state, and local health, sanitation and
plumbing codes.
▪
Pipe sealing tape (Teflon®) must be used at all connection points. The use of a pipe
sealing compound is not recommended.
What you will need
NOTE: all items are included in the Alto-Shaam installation kit, or must be provided by the
installer.
▪
One (1) 3/4" NPT 90° brass elbow for the treated water inlet
▪
3/4" NPT piping with female fitting for treated and untreated water inlets
To install the treated and untreated water fittings, follow these steps.
Step Action
1. Remove
the fan motor cover
a
to access the treated water inlet.
2. Install
the 90° brass elbow
b
into the treated water inlet, then re-install the fan motor cover.
3. Install
the tee connector
c
into the untreated water inlet, then install the lower close nipple
d
.
Install the spray hose To install the spray hose, follow these steps.
Step Action
1. Install
the sprayer holder
e
into the three screw holes near the front of the oven.
2. Install
the shutoff valve assembly
f
into the two screw holes near the rear of the oven.
3. Connect
the spray hose
g
to the shutoff valve and place the sprayer in the holder.
4. Use
the supplied hose
h
to connect the shutoff valve to the tee connector.
To connect the water supply, follow these steps.
Step Action
1. Connect
the treated water supply
i
to the 90° brass elbow.
2. Connect
the untreated water supply
j
to the tee connector.
The oven is now connected to the treated and the untreated water supply.
Install the water
fittings
Connect the oven
to the water
supply