Alto-Shaam CT Express Combitherm CTX4-10E, Руководство по установке

Страница: 32 / 52

Installation
32 MN-29805 • Rev 11 • 07/18 • Combitherm CT Express Installation Manual
Indicator Light
If the indicator light does not illuminate,
the filters may be missing or not properly
aligned. Check them for proper positioning.
Ventless hood and oven will not operate
unless the hood is closed properly.
Ventless Hood Model
The Ventless Hood option is factory installed directly on
the top of the Alto-Shaam Combitherm appliance. The
hood is designed to vent clean air back into the kitchen,
filtering vapors and grease. A high-power fan draws steam
and fumes into the hood intake and out the top surface
exhaust vent. Fumes and vapors are circulated through
filters. An activated charcoal filter cleans the air before
venting it out the top of the hood.
Filter Door Latch
Using a coin or screwdriver,
turn to open; reverse procedure
to close and latch.
Hood and oven will not operate unless
this is closed properly.
Operation
1. Turn the ventless hood power knob ON.
2. Indicator light will illuminate.
3. Wait five seconds, then press the Combitherm
appliance power ON.
Timed Latching Mechanism: In order
to evacuate steam and grease-laden air
from the oven interior, this mechanism
prevents the operator from fully opening
the oven door for 20 seconds. Longer
wait times can be programmed into the
control. The mechanism automatically
disengages at the end of a pre-set time
allowing full door extension.
Emergency Latch Release: This release
is to be used ONLY if the timed latch
mechanism is not working or in the event
of a power outage. Repeated use of the
emergency release may damage the
switching mechanism. The latch is located
on the right side of the appliance, toward
the back.
2
1
3