Alto-Shaam CT Express Combitherm CTX4-10E Скачать руководство пользователя страница 43

Страница: 43 / 52

Cleaning and Preventive Maintenance

MN-29805 • Rev 11 • 07/18 • Combitherm CT Express Installation Manual 43

Unit Information

Business Name: _______________________________________

Model Number: _______________________________________

Serial Number: ______________________________

12-Month Inspection Start Date: ______________________________

12-Month Inspection Checklist

Replace - Steam bypass hose

Inspect - Cleaning pump hose

Inspect/Test - Proper draining of the oven cavity

Inspect - All drain lines for leaks or clogs

Inspect - All solenoid hoses (both ends)

Inspect - Upper browning valve hose

Inspect - Low pressure relief valve & hose

Inspect - Convection element seal (from the electrical compartment)

Inspect - Gas heat exchanger seal (from the electrical compartment)

Inspect - N6 oven temperature probe seal

Descale the steam generator

Remove & Inspect - Steam generator elements

Inspect - Hand shower hose

Inspect - Hand shower handle

Inspect - Product probe

Inspect - Water injection tube

Inspect - Oven cavity for any signs of scale buildup

Inspect - Oven cavity lamp

Inspect - Oven cavity for signs of grease/carbon buildup

Inspect - Behind the fan panel inside the oven cavity for signs of grease/carbon buildup

Inspect - Behind the fan panel inside the oven cavity for signs of scale buildup

Electric boiler units only

Gas units only

Electric units only

More frequent preventative maintenance inspection/service is required when cooking large quantities of fatty foods. The acids and

related compounds found in fat, particularly chicken fat, accumulate over time and can damage appliance components. Failure to

regularly inspect and maintain the appliance may result in void of warranty, property damage, or personal injury.

CT Express™ Checklist - 12 Month

Содержание CT Express Combitherm CTX4-10E





















































Результаты поиска

Содержание CT Express Combitherm CTX4-10E

Отзывы:

Бренды по названию

Популярные бренды

Alto-Shaam CT Express Combitherm CTX4-10E, Руководство по установке

Результаты поиска

Содержание CT Express Combitherm CTX4-10E

Отзывы:

Бренды по названию

Популярные бренды