01: ------ lev 0
abcdefgh smtwtfs
Present the proximity key to the internal proximity reader. The internal reader is placed between the four
LED’s, behind the VisAccess sign. The keypad automatically converts the unique code of the proximity key
to a 6 digit user code. When you have done this, press the <#> key to confirm. The LCD display will change
to:
01: 114165 lev -
abcdefgh smtwtfs
Now enter the desired user code level (1, 2, 3, 4, 5, or 7), followed by pressing the <#> key. If direct arming
and disarming when presenting the proximity key is desired, select level 7.
The display will show:
01: 111111 lev 4
ABCDEFGH smtwtfs
Attention:
The sections are now shown as capital letters:
When ABCDEFGH are shown as capital letters, this means the sections now can be edited. When you press
the <1> key, the sections characters ABCDEFGH will change to . BCDEFGH. You see the capital “A”
replaced by a dot. When you press the <1> key again, the capital A will return. Using the keys <1> to <8>
you can change the characters ABCDEFGH. The characters that can be read represent the sections for which
this code is valid. In this example, user code 01 is given code level 4 and is valid for sections A and B. Press
the keys 3,4,5,6,7 en 8 to replace the desired letters with dots. Confirm your selection by pressing the <#>
key. The display will show:
01: 111111 lev 4
ab...... SMTWTFS
Attention:
The characters representing the sections turn to lower case letters, and the characters representing
the days of the week now become capital letters. This means that the days are now selected and ready to be
edited. Again the keys <1> to <7> control the position of the characters. So, if user 01 is not allowed to arm
or disarm the system on Saturdays and Sundays, press <1> to change the first S to a dot (Sunday), and then
press <7> to change the last S to a dot (Saturday).
The display will change to:
01: 111111 lev 4
ab...... .MTWTF.
Now press the <#> key to confirm your settings. The capital letters MTWTF will become lower case letters:
01: 111111 lev 4
ab...... .mtwtf.
Now you have completed the programming of user code 01. You can press the <
↓
> key to scroll to user
code 02.
Attention:
When proximity keys are used to arm and disarm the system, you have to set the number of
digits of the user codes to 6.
AlphaVision NG installation manual Rev. 2.0 27-08-2003 Blz. 61/101
Save programming