69
Figure 2.
HDD Group Settings Menu
5.
Select
OK
to save settings and exit the Group Settings menu.
Note:
By default all HDDs belong to group 1.
11.3 Set HDD Status
You may change the behavior of your HDD by changing its status. The status of a
HDD can be set to read-only or read/write (R/W).
11.4 Setting HDD to Read-Only
A HDD can be set to read-only to avoid important recorded files from being
overwritten when the HDD becomes full.
To set a HDD to read-only:
1.
Click Menu > HDD to enter the HDD Management menu.
2.
Select HDD to be protected.
3.
Select the
Property
button to enter the Property Settings menu, as shown
in Figure 3.
Figure 3. HDD Property Settings Menu
