26
allows a user to access the live view of the camera according to the configured
CVBS video parameters.
3. When there is no VGA display connected to DVR, the VIDEO OUT will be used
as the main video output, and menu operations are accessible; the VGA will be
used as the spot video output which only allows user to access the live view of the
camera according to the configured VGA video parameters.
4. The connection or disconnection of the VGA monitor when running will not affect
its functions as detailed above.
DVR
Connections
VGA
VID OUT 1
SPOT
VGA main
MULTI - MENU
MULTI -NO MENU
No VGA
-
MULTI - MENU
VGA Spot
MULTI - NO MENU
MULTI - MENU
MULTI = multi-screen display
MENU = Menu available
Channel zero encoding
Purpose:
Sometimes you may need to get a remote view of many channels in real time from the
web browser or client software using minimal bandwidth requirement without
affecting the image quality. Channel-zero encoding is an option whereby a number of
channels can be displayed within the confines of a single channel display without the
overhead of a large network bandwidth.
Enter the
Display
Settings interface.
Menu> Settings> Display
Select the
Channel-Zero Encoding
tab.
Click the checkbox after
Channel-Zero Encoding.
Configure the Frame Rate and Max. Bitrate. After you set the Channel-Zero encoding,
you can get a view in the remote client or IE browser of all the channels in one screen.
3.7 Set Camera Order
The Camera Order settings allow you to set camera sequence in selectable live view
display mode. See the following figure:
Figure 5.
Camera Order Settings
