62
9.5 Customising Patrols
Patrols can be programmed to move the PTZ to different key points and make it stay
there for a defined duration before moving on to the next point. The key points are
defined by presets which can be set by following the steps above in
Customise
Presets.
To set up and call PTZ patrols:
1.
Enter the
PTZ Control
interface, shown in Figure 3, by selecting PTZ from
the mouse menu or clicking the
PTZ
button on the front panel.
2.
Select the
Patrol
button to enter the Patrol Management menu, shown in
Figure 5.
Figure 5.
Patrol Management Menu
3.
In the
Patrol Management
menu, you may:
Configure a Patrol:
1.
Select a
Patrol Number
to set.
2.
Select valid presets (See
Customise Presets
) and click the Set
button to enter the Patrol configuration menu. A sequence should
have at least 2 valid presets.
3.
Set the
Key Point No.
,
Duration
, and
Speed
(Figure 6). The
Key
Point No.
determines the order at which the PTZ will follow while
cycling through the patrol. The
Duration
refers to the time span to
stay at the corresponding key point. The
Speed
defines the rate at
which the PTZ will move to the current preset.
Figure 6.
Patrol Configuration Menu