60
To configure PTZ settings in DVR:
1.
Click Menu > Settings > PTZ to enter the PTZ Settings menu, shown in
Figure 2.
Figure 2. PTZ Settings Menu
2.
Select channel where PTZ camera is installed next to
Camera
label.
3.
Configure the settings of baud rate, data bit*, stop bit*, parity*, flow
control*, PTZ protocol and address.
* The settings asterisked normally are the defaults for most PTZ cameras.
4.
Click
OK
to save settings and exit the PTZ Settings menu.
Note
: All setting parameters (baud rate, data bit, stop bit, parity, flow
control, PTZ protocol and address) must be consistent with the PTZ
camera connected.
9.3 Setting PTZ Presets, Patrols & Patterns
The DVR allows you to program presets, patrols and patterns for a range of PTZ
cameras. The PTZ control panel provides a series of PTZ controls, shown in Fig. 3.
Figure 3.
PTZ Control Interface
