56
4.
If you want to configure your own settings, enter the settings for:
• IP Address:
IP address you would like to use for your DVR.
• Subnet Mask:
Subnet Mask of network.
• Default Gateway:
IP address of your Gateway. Typically the IP
address of your router.
• Preferred/Alternate DNS Server:
The preferred and alternate Domain
Name System (DNS) Server to be used with your DVR.
5.
Click
OK
to save settings and exit the Network Settings menu.
8.2 NTP Server Settings
A Network Time Protocol (NTP) Server may also be set up on your DVR to maintain
accurate current date and time.
To set up an NTP server:
1.
Click Menu > Settings > Network to enter the Network Settings menu.
2.
Select the
Advanced
tab.
3.
Click the
Set
button next to
NTP
to enter the NTP Settings menu, as
shown in Figure 8.
Figure 8.
NTP Settings Menu
4.
Check the
NTP
checkbox to enable this feature.
5.
Configure NTP settings:
• Synchronize Interval:
Time in minutes to synchronise with NTP
server.
• NTP Server:
Address of NTP server.
Note:
The address can be set to the IP address or the Domain name. When the
Domain name is used, please set the DNS server address.
6.
Click
OK
to save settings and exit the NTP Settings menu.
