22
14.
Click the
OK
button. This will take you back to the
Schedule
tab. To
copy the schedule to a different channel, select the channel or all under
Copy To
and click the
Copy
button.
15.
Click
Next
button to access the
Network Settings
dialog box, shown in
Figure 8.
Figure 8. Network Settings
16.
To configure network settings, click the
Enter
button.
17.
Enter the
IP Address
,
Subnet Mask
and
Default Gateway
settings.
18.
Click
OK
button to return to the Setup Wizard.
19.
If all the settings have been entered, click
Done
to finish and exit the
Setup Wizard.
You’ve completed the Setup Wizard. The next step in the initial setup process is to
setup the system date and time.
After completion of Setup Wizard, enter the Live View window.
2.4 Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp
recordings and events.
1.
Open the
Menu
window by
clicking the
MENU
button on the
remote or front panel. You can also
go to the Menu window by right
clicking with the mouse and
clicking the Menu button.
2.
Click the
Settings
icon.
3.
Click the
General
icon.
4.
Enter date and time in System
Time.
5.
Click Apply then OK to save.
Figure 9.
General Settings
