59
9. PTZ Control
9.1 Navigate PTZ Menu
PTZ menus can be navigated through with either the mouse or the front panel/remote.
For quick access to certain PTZ settings, right clicking with the mouse in a display
while in PTZ control mode will enter the PTZ settings menu. This menu is shown in
Figure 1.
Figure 1.
PTZ Settings Menu
The items that can be found on this menu include:
•
Camera:
Select a PTZ camera.
•
Call Preset:
Call a PTZ preset.
•
Call Patrol:
Call a PTZ sequence.
•
Call Pattern:
Call a PTZ pattern.
•
Preset Settings:
Enter PTZ preset configuration menu.
•
Patrol Settings:
Enter PTZ sequence configuration menu.
•
Pattern Settings:
Enter PTZ pattern configuration menu.
•
PTZ Menu:
Enter PTZ control menu.
•
PTZ Settings:
Enter PTZ settings menu.
9.2 Configure PTZ Settings
Settings for a PTZ camera must be configured before it is used. Before proceeding,
verify that the PTZ and RS-485 settings in the DVR are identical and connected
properly. The T+ is the RS485 positive (usually connected to the orange RS485 data
cable on the PTZ camera) and T- is the RS485 negative (usually connected to the
yellow RS485 data cable on the PTZ camera).
