Agilent Technologies 4294A, Руководство по программированию

Страница: 395 / 518

Chapter 16 395
GPIB Command Reference
OUTPVACP?
16. GPI
B
Com
m
an
d Re
fe
re
nce
( O -
R )
OUTPVACP?
Syntax OUTPVACP? <numeric 1>
Description When the oscillator level monitor function is set to on (set to ON with “OMON” command
on page 365), reads out the oscillator voltage level monitor value of the specified
measurement point. (Query only)
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric 2}<newline><^END>
If the oscillator level monitor function is set to off, the readout is invalid.
Corresponding
key No front panel key is available to execute this function.
PARS
Syntax PARS {ON|OFF|1|0}
PARS?
Description For the marker search function for the active trace (set with the “TRAC” command on page
457), determines whether to perform partial search.
Parameters
Query response
{1|0}<newline><^END>
Corresponding
key
[Search] - SEARCH RANGE MENU - PART SRCH on OFF
<numeric 1>
Description Number of the measurement point you want to read out (the
number assigned in order from the left edge assuming that the
number of the leftmost measurement point is 1)
Range 1 to the number of points
Resolution 1
{numeric 2}
Description Voltage monitor value of the oscillator level
Description
ON or 1 Enables the partial search.
OFF or 0 (initial value) Disables the partial search.