Adtech ADT-DK300A, Руководство производителя

Страница: 35 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
26
(5) Press [Start], [EOB] to start executing the program block, as shown below.
4.3 USB disk DNC
The program read from external USB disk can operate the machine tool without saving in CNC memory.
This operation is called as USB disk DNC operation.
The step of USB disk DNC operation follows:
(1) Insert the USB disk;
(2) Select [Monitor], [File] in the menu to enter file operation interface;