Adtech ADT-DK300A, Руководство производителя

Страница: 146 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
137
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used to configure servo spindle stop detection port; the default value is
null. In tool magazine, if spindle stop is required, start spindle stop
command, and determine whether stop in place by detecting spindle
stop port
090 Servo spindle pulse control output No.
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used to configure the switch port of servo spindle pulse control mode;
the default value is null. Used when servo spindle is specified.
091 Servo spindle rigid tapping output No.
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used to configure the servo spindle rigid tapping control output port;
the default value is null. Current version is not used.
092 Servo spindle ready input No.
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used to configure servo spindle ready input port; the default value is
null.
093 Servo spindle quasi stop input port No.
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used to configure the servo spindle stop in ‐ place input port; the default
value is null. Current version is not used.
094 Servo spindle zero speed in ‐ place input port No.