Adtech ADT-DK300A, Руководство производителя

Страница: 104 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
95
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : Control mode corresponding to principal axis S code (frequency
conversion mode)
0: Analog output
1: Section speed regulation (4 ‐ digit code), as below:
OUT23 ‐‐‐‐‐‐ S0
OUT22 ‐‐‐‐‐‐ S1
OUT21 ‐‐‐‐‐‐ S2
OUT20 ‐‐‐‐‐‐ S3
In analog output mode, the analog voltage is:
V=S/MaxRPM
S is the rotation set by the user, and MaxRPM is the maximum rotation
of principal axis set by the parameter (P4.017);
In switching quantity mode, constitute block 0 ‐ 15 according to four ‐ digit
code to output; S code value is restricted to 0 ‐ 15;
062
X ZeroReturn Speed
063
Y ZeroReturn Speed
064
Z ZeroReturn Speed
065
4 ZeroReturn Speed
Range : 0~9999
Unit : mm/min
Authority : Operation admin or higher
Default : 1000
Effective time : Instant
Note : Set the home speed of every axis separately; both program home and
mechanical home use this parameter
066 Safe Signal ELevel
Range : 0~1
Unit : LOGIC VOLTAGE LEVEL
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
Set the effective voltage level of the system safety signal. The source of
safety signal can be customized by the user, and generally may be