Adtech ADT-DK300A, Руководство производителя

Страница: 138 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
129
the rotation directly later, while the controller will output corresponding
analog voltage according to linear scale automatically.
022
Spi.Gear Numerator
023
Spi.Gear Denominator
Range : 1~65535
Unit : None
Authority : Operation admin or higher
Default : 1
Effective time : Instant
Note : If the principal axis has gear position, please set the hardware gear ratio
to this parameter, which hasn’t been used in standard version, but may
be used in certain special conditions.
024 Spi.Encoder Logic Dir
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : The direction of rotation of the spindle encoder.
025 Spi.OpenDelayTime(ms)
Range : 0~9000
Unit : Ms
Authority : Operation admin or higher
Default : 6000
Effective time : Instant
Note : Set the delay time through this parameter to start the spindle. The
parameter is mainly to prevent processing before the spindle is started.
026
Servo spindle ready level
027
Servo spindle quasi stop in ‐ place level
028
Servo spindle zero speed in ‐ place level
029
Servo spindle speed arrival level
Range : 0~1
Unit : None
Authority : Operation admin or higher